Is the Axial Wraith spawn brushless?

Thread: axial wraith with 3500kv high tourque brushless system. That is a little high for crawling.

What is the best motor for Axial Wraith?

The Pro4 is the perfect motor for the Wraith. I pulled my motor apart and coated the sensor with conformal coating and then sealed the can up with clear silicone. I ran it in 5″ of water and mud the other day with no problems (also coated the RS Pro).

What scale is a Axial Wraith?

The Axial Wraith™ changes the game with its impressive 1:1 scale looks, high-speed monster truck “bashability,” and technical “crawl” capabilities.

How can I make my axial SCX10 2 faster?

The quickest way to adjust the gearing on your Axial Racing vehicle and achieve readily noticeable results, is to change the pinion gear. If you were to change the stock 20-tooth pinion on your Honcho SCX10 RTR to a 25-tooth pinion, you would immediately notice the truck is faster.

Is brushed or brushless better for crawling?

Brushed motors provide excellent slow speed control making them a great choice for rock crawlers where precise driving is key. Brushless motors, such as the Vanguard 3150KV, are also more efficient, so they can provide best use of power (more runtime) and make more power.

Is the Axial Wraith 1.9 waterproof?

The molded V8 engine replica seen here, for example, is actually a protective waterproof receiver box. The new adjustable battery tray is now relocated lower and further forward for better weight distribution and center of gravity (COG).

How fast is the axial SCX10?

Ultimately, the Axial SCX10 II was never meant to go fast because crawlers are built for, well, crawling—as I found out when I checked its baseline speed with my GPS Speed Tracker: 7mph.

How can I make my axial SCX10 3 faster?

What is the best brushless crawler motor?

The 55t TorqueMaster 540 Expert motor for crawling is our best suggestion. It is not overly powerful on 2 or 3s LiPo and is less likely to break parts. Faster (lower) turn counts, Pro series brushed motors, and brushless motors can break parts more easily.

Is the Axial Wraith waterproof?

It was water resistant, but not waterproof. Found out the hard way. I used a balloon on the esc and on my bec. I applied a good amount of silicone grease and zip tied it up.

What should the ESC be on an axial Wraith?

The most economic way is to just replace the stock motor and still use the stock ESC. A motor around 25-45 turn is good, depending on how much wheel speed you would want for your Axial Wraith. If you would like a little more tune-ability or run a high voltage motor, then you would need to change the ESC as well.

When to replace stock motor on axial Wraith?

If crawling or trail riding is what you like to do, then there would be a lot of options. The most economic way is to just replace the stock motor and still use the stock ESC. A motor around 25-45 turn is good, depending on how much wheel speed you would want for your Axial Wraith.

Is the spawn Wraith a 4WD Rock Racer?

The Wraith™ Spawn 1/10th Scale Electric 4WD Rock Racer features a realistic full tube-frame chassis design that is manufactured with high strength composite materials. The Wraith™ IS BUILT TO GO FAST and is not just a low speed rock crawler.

What kind of material is axial racing Wraith made out of?

The AR60 OCP-Axle™ is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The AR60 OCP-Axle™ tubes are reinforced and beefed up with a boxed-in axle truss to distribute stress over a larger area.

Is the Axial Wraith spawn brushless? Thread: axial wraith with 3500kv high tourque brushless system. That is a little high for crawling. What is the best motor for Axial Wraith? The Pro4 is the perfect motor for the Wraith. I pulled my motor apart and coated the sensor with conformal coating and then sealed the…