How do you reset the maintenance light on a Lexmark ms810n?

How do you reset the maintenance light on a Lexmark ms810n?

To reset the maintenance count perform the following procedure:

1. Turn off the printer.
2. Enter the Configuration Menu.
3. Select Reset Roller Kit Counter from the Configuration Menu.
4. From the options displayed, select the roller kit to reset.
5. Select Yes to reset the roller kit counter value.

How do I reset my Lexmark printer maintenance?

How To Reset Lexmark Maintenance Kit?

1. Turn on your Lexmark printer after replacing the maintenance kit.
2. Press and hold the Select + Return buttons for 8 seconds.
3. Release the buttons when the reset maintenance control menu is displayed.
4. If your printer displays the maintenance message, press the Select button.

How do you reset the maintenance light on a Lexmark cx510de?

Re: Lexmark cx510de Maintenance kit diag mode : hold key 3 and 6 and power on machine. keep holding for about 15 sec and then release. To reset the fuser count:1 Select Printer Setup from Diag Menu, and press Select. 2 Select Reset Fuser Cnt, and press Select.

What does it mean when your printer says maintenance kit low?

If the display panel on your HP LaserJet reads “Perform Printer Maintenance”, “Perform User Maintenance”, “Maintenance Kit Low”, “Maintenance Kit Very Low”, or anything along those lines it means your printer needs a preventative maintenance kit, which includes a fuser and various rollers.

How long does a printer maintenance kit last?

In general, you should update your printer maintenance kit every one to two years. However, once every year or once every other year is the bare minimum. Even if your devices are running fine and you don’t think it’s necessary, it’s wise to perform regular checkups.

How do I reset my Lexmark cs510de?

To restore the factory defaults on the printer:

1. Press the Menu> button on the operator panel until Utilities Menu (or Tests Menu) appears on the display.
2. Press the Select button once to enter the menu.
3. Press the Menu> button until Factory Defaults appears on the display.
4. Press the Select button.

How to reset the maintenance roller kit on Lexmark ms810?

1. Turn off the printer. 2. Enter the Configuration Menu. Press and hold the 2 and 6 buttons simultaneously. Turn on the printer. Release the buttons after 10 seconds. The Configuration Menu appears on the LCD. 3. Select Reset Roller Kit Counter from the Configuration Menu.

Where to find fuser code on Lexmark ms810n?

To identify the supported fuser type, view the label on the fuser. Do either of the following: Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of the fuser.

Where to find maintenance kit on Lexmark printer?

Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the fuser. Using certain types of paper may require more frequent replacement of the maintenance kit.

How soon does Lexmark fuser maintenance kit ship?

Order $75.00 more for free shipping to the continental 48 states! * How soon will this item ship? Order by 3:30 PM MST tomorrow and your product will ship tomorrow!

How do you reset the maintenance light on a Lexmark ms810n? To reset the maintenance count perform the following procedure: Turn off the printer. Enter the Configuration Menu. Select Reset Roller Kit Counter from the Configuration Menu. From the options displayed, select the roller kit to reset. Select Yes to reset the roller kit counter…