How do you read an OS map grid reference?

When taking a grid reference, always read left to right along the bottom or top of the map first and then bottom to top along the side of the map. This is particularly important in an emergency situation.

How do you reference an Ordnance Survey map?

APA Referencing Guide — Digimap Ordnance Survey

Organisation. ( followed by full stop)
(Date of publication). ( in round brackets, followed by full stop)
Title (e.g. location of map, for example the town or street name)
[Map]. (
Scale of map, (followed by comma)
Product name. (
URL.

How do you read coordinates on a grid map?

Coordinates are written along the sides of a map designating specific grid lines. (These grid lines are based on UTM values.) The two larger numbers identify a grid line and are known as principal digits as depicted below. To plot coordinate values, always read right, then up.

How do you read area references?

An easy way to remember this is that to get the first number, you go along the corridor (horizontal, x axis, eastings) and then up the stairs (vertical, y axis, northings). For example, the number 2 in the diagram below is square 19 across and square 45 up and therefore, the four-figure grid reference is ‘1945’.

Can you use OS grid references on Google Maps?

To use Google Maps position the map and, using the zoom tool on the left-hand side of the screen, zoom in to the maximum level to find the place for which you want a Grid Reference. Then either: Click “Grid Reference Tools” and choose “Get Grid Reference from Map”. The map will centre on the place name, if found.

What are area references?

An area reference allows people to find a general location in a grid square. Area references comprise four-figure numbers. The first two figures are always an easting and the second two figures are always a northing.

How do you use OS grid references?

Grid references

Start at the left-hand side of the map and go east until you get to the bottom-left-hand corner of the square you want. Write this number down.
Move north until you get to the bottom-left corner of the square you want.

What is the difference between area reference and grid references?

The area reference gives a general location, while the grid reference provides an accurate location for a place or feature. Eastings are the lines which increase in number towards the east; they are vertical lines. Northings are the lines which increase in number towards the north; they are horizontal lines.

Where is the grid reference in Bembridge OS Explorer?

For example, on the Bembridge OS Explorer map I am at grid reference SZ 644 874, at the crossroads. Put your new skills into practice and get out your OS map to have a go at finding a few grid references. Let us know how you’ve got on in the comments below.

Which is the best guide for map reading?

Map reading made easy! For beginners to advanced, adults or teenagers, find all you need to make map reading easy We’ve collected some of our top map reading resources all in one place to get you started in this vital outdoor skill. Too easy for you? Expand your knowledge with Map reading – advanced guides.

How to write a grid reference on a map?

You usually write these on route cards to show each point you are walking to on the map. There are different levels of detail that you can show. The easiest is a 4 figure grid reference, but the most used and expected is the 6 figure grid reference.

What are the grid lines on an OS map?

OS maps are covered in a series of blue grid lines that are used to pinpoint exact locations anywhere on a map. Learn what these are called and how to find a grid reference. Rather than just showing north, modern compasses have many features to assist in planning and navigation.

How do you read an OS map grid reference? When taking a grid reference, always read left to right along the bottom or top of the map first and then bottom to top along the side of the map. This is particularly important in an emergency situation. How do you reference an Ordnance Survey map?…