How do I lower my C3 Corvette?
How do I lower my C3 Corvette?
Easiest and by far the cheapest way to lower a C3 is to cut 1/2-1 coil off the front springs and get longer rear spring bolts (10″). You can also buy springs from Van Steel, VB&P etc that’ll lower your car. I lowered mine with the VB&P perf. + kit, which allows me to adjust the ride height about 4″ in total!
How do you adjust the height on a C3 Corvette?
Lower the car and measure the distance from the floor to the top center portion of the rear wheel openings. Make adjustments by rotating the spring nut on the new bolts. Turn the bolts clockwise to raise the car and counterclockwise to lower it. Refer to your notes in step 1 to adjust to the new desired height.
What is C3 Corvette?
The Chevrolet Corvette C3 was produced from 1967 to 1982 and is the third generation of the Corvette sports car. C3 Corvettes featured a new body and interior, but the chassis and engines were carried forward from the previous generation C2.
What are C3 Corvettes worth?
The value of the Corvette C3 varies depending on whether you are looking at a classic corvette like the L88, a collector edition C3, or just a daily driver. You may buy a fair condition 1982 C3 corvette coupe for $8000; however, a Concours condition 1968 Convertible L88 will fetch over $500,000.
Why are Corvette C3 so cheap?
As to why there are affordable C3s to be found, in simple terms one reason is that GM built more than half a million of these cars. Many were taken care of since new, while others have some degree of restoration work on them. That means there’s still ample supply of good examples.
How can I lower the ride height of my C3 Corvette?
Many C3 Corvette owners want to lower the ride height of these cars. Aftermarket shorter front coil springs and adjustable rear spring bolt kits can easily lower the ride height by one inch. These items can be obtained from most Corvette parts suppliers. Park the car on a level surface and set the emergency brake.
When did the C3 Corvette come out?
The C3 version of the Corvette encompasses the years 1968 through 1982. These cars are often referred to as “Stingrays” or “Sharks.” Many C3 Corvette owners want to lower the ride height of these cars.
Which is the most attractive of the corvettes?
Your Corvette C3 is one of the sleekest and most attractive of all of the Corvette line of sports car. Many owners of these vehicles purchase them mostly for their unique appearance. However, if you find that you’re in an area with other Corvette C3 vehicles, you may have a hard time distinguishing your car from the rest on the street.
Where is the hydraulic jack on a corvette?
Check to make sure that the emergency break is on, then mount the front end of the vehicle up using the hydraulic jack. Place the jack stands underneath the outer sides of the car so that you’ll be able to access the underside easily.
How do I lower my C3 Corvette? Easiest and by far the cheapest way to lower a C3 is to cut 1/2-1 coil off the front springs and get longer rear spring bolts (10″). You can also buy springs from Van Steel, VB&P etc that’ll lower your car. I lowered mine with the VB&P perf.…