What size property can you subdivide?

So generally speaking, you’ll need to have an existing lot of at least 1200sq metres or larger to subdivide into two. As an alternative to – or in some cases, in addition to subdivision, it is also possible to build a minor dwelling in this zone, check with us for the rules on this.

Can I subdivide my property Waipa?

Two years ago Waipa District Council announced proposed new rural subdivision rules in their district plan review. Today they’ve taken effect. However, one old rule reinstated is the one allowing surplus houses to be subdivided off the farm. This is reintroduced as a discretionary activity.

What size block can I subdivide?

Blocks must be at least 400 square metres, or the minimum lot size according to council, whichever is greater. Blocks must be at least 12 metres wide. For dual occupancies where one dwelling is located above another, the block must be at least 15 metres wide.

Can you subdivide E3 land?

Dual occupancies are permissible in parts of the E3 zone, but are confined to instances where an existing waterfront cottage is being retained with a dwelling. Subdivision is limited to large sites, as each resulting lot must meet the minimum lot size (850m2 or 1000m2 for internal lots).

Can I subdivide my land Waikato?

To find out if you can subdivide your property you will need to contact a land surveying firm. Contact us for an outline of the process, what rules apply to your property and what the costs might be.

Can single house zone be subdivided?

Single house zone subdivision guidelines Only one house is anticipated on each site. If you want to separate the minor dwelling from the main house so it sits on its own site, you will need to meet the required 600 square metres site area, for both the main dwelling and minor dwelling.

How do you know if you can subdivide?

Essentially, in order for a property to be approved for subdivision, it needs to conform to the local town planner’s minimum lot size. The first requirement pertains to width, the second to overall area, and the third to zoning. Subdivision is not allowed in certain zoning types.

Is it cheaper to build a duplex than two houses?

The cost to build a duplex is generally higher than to build a single-family residence. But these costs can often quickly pay for themselves by helping you generate more rental income or allowing you to reside in a unit that’s closely situated to a rental property for convenience’s sake.

Can r2 zoning be subdivided?

It may be subdivided but each lot has to meet the floor space ratio and landscape standards of the plan. If one dwelling is set behind another the rear dwelling must be single storey.

Can you build on E3 zoned land Wollongong?

While the land is zoned E3, building is only permitted on sites of more than 40 hectares. “Under the provisions of the Wollongong Local Environmental Plan 2009 the land use zoning is E3 Environmental Management.

Can you build on E4 zone?

Bed and breakfast accommodation, home businesses, home industries and secondary dwellings have been added as permissible uses in the E4 zone. What are the development controls in E4? The maximum height in the E4 zone is generally 8.5 m. (A 9m height limit still applies in Greenhills Beach, zoned E4).

How close to the boundary can I build?

You cannot build a house (or other structure) closer than 2 metres to a boundary that you share with a neighbour. Height (building) recession plane: Recession planes are lines that proceed at an angle from the horizontal, measured from any point 2.5 metres vertically above ground level along site boundaries.

What size property can you subdivide? So generally speaking, you’ll need to have an existing lot of at least 1200sq metres or larger to subdivide into two. As an alternative to – or in some cases, in addition to subdivision, it is also possible to build a minor dwelling in this zone, check with us…