Can you run 40s on Toyota axles?
Can you run 40s on Toyota axles?
Can you run them, yes.
Are Toyota axles strong?
The only problem is that they are passenger offset both front and rear. But ultimately, they’re not any stronger. All the strength determining stuff is the same size… the only real difference is the larger R&P. Toy axles work wonderfully on light, 4 or 6 cyl.
Are Dana axles good?
Like we said above, the Dana 60 is the stronger axle. If you want to run big tires or big power you need a Dana 60 axle. At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power. Most people don’t realize how heavy a Dana 60 is and how much unsprung weight affects handling.
Can Dana 44 tires run 40?
For a daily driver or a non wheeling rig, 44 and 40’s are fine.
How wide is a Toyota straight axle?
Toyota Axle Widths
| Vehicle models | Front or Rear | Width, WMS to WMS |
|---|---|---|
| Toyota Land Cruiser FJ70 | Front axle | 56.2″ |
| Rear axle | 55.6″ | |
| Toyota FJ80 and FZJ80 | Front axle | 63.3″ |
| Rear axle | 63.5″ |
What years did Toyota have solid front axles?
Solid axle Toyotas were from 1979-1985 in pickups, 84 and 85 in 4Runners, and up until 1997 in Land Cruisers. Other countries had different options available. T100’s were all IFS and were made from 1993-1998. In the US 85 was the last year of the solid front axle.
How much does a Toyota solid axle weigh?
The housing is probably lighter than the carrier by a few pounds, the carrier weighs about 100lbs, maybe as much as 120lbs. The axles probably weigh 30lbs each, 40lbs at the most, shoes and drums if included will add about 40lbs.
Are Dana 35 axles good?
Make no mistake, a built Dana 35 is a strong and capable axle. Obviously not as strong as a build Dana 44 (or similar), but if you’re not going to be running anything larger than 33″ tires, a built Dana 35 should suit you just fine.
Is the Dana 44 strong?
It used to be that the Dana 44 was considered to be a fairly stout axle. But as trails got tougher and tires got larger, the 44 got dumped in favor of even stronger hardware. But the Dana 44 is a pretty stout piece, and many companies offer parts to make your 44 even stronger than it now is.
How much lift do you need to run 40 inch tires?
You can fit 40s with as little as 2.5″ of lift if you have high clearance fenders and dont mind cutting.
Can you run 40s on a Dana 30?
Registered. so all it takes is for one person on the internet who you have never met to say “yea, you can run 40’s”, and you will run 40’s on a dana 30? sure, you can.
How wide is a Dana 44 front axle?
My 78 narrow track waggy front dana 44 was narrowed by 3.5″ and is now right around 56-56.5 inches wide which would put the stock width at 59.5-60″ I could go home and measure it for sure if you want.
Can you run 40s on Toyota axles? Can you run them, yes. Are Toyota axles strong? The only problem is that they are passenger offset both front and rear. But ultimately, they’re not any stronger. All the strength determining stuff is the same size… the only real difference is the larger R&P. Toy axles work…