How do I enable SSH on HP switch?

How to: Configure SSH on HP ProCurve Switches

Step 1: Log into the Switch. Log into the switch’s Web interface using an account with read-write permissions.
Step 2: Create a Certificate.
Step 3: Generate a Private/Public Key pair.
Step 4: Enable SSH.

How do I backup my HP switch using putty?

HP Procurve – Backup and Restore a Configuration

Backup a configuration.
Launch Putty, select the COM port of your serial to USB adapter and click “Serial”
Select “Session” from the left hand pane and adjust the settings as shown below.
Click open.
Log into the device using the log in credentials.

How do I reset the password on my HP ProCurve switch?

Re: Default Password HP Procurve Switch 2824

Press and hold the Reset button.
While holding the Reset button, press and hold the Clear button.
Release the Reset button and wait for about one second for the Self-Test LED to start flashing.
When the Self-Test LED begins flashing, release the Clear button.

Is the HP ProCurve switch 2524 j4813a reliable?

Okay, so the ProCurve HP2524 is not the latest technology. And I know the fan of this model is not the quietest. However, all ProCurves are built solid and are extremely reliable. I recently bought several of these from another vendor but for some reason, this unit had the firmware updated (thanks!).

How many ports does the HP ProCurve switch have?

The HP Procurve managed 24-port switch has 10/100BASE-TX autosensing per port and 2 open transceiver slots for media flexibility. The HP Procurve switch 2524 is ideal for low-cost, managed 10/100 connectivity with uplinks.

How big is the HP j4813a in inches?

HP J4813A 6 pounds 20 x 15 x 15 inches 20 x 15 x 15 inches HP B002UQQV0U No February 21, 2008 Amazon.com Return Policy: You may return any new computer purchased from Amazon.com that is “dead on arrival,” arrives in damaged condition, or is still in unopened boxes, for a full refund within 30 days of purchase.

How do I enable SSH on HP switch? How to: Configure SSH on HP ProCurve Switches Step 1: Log into the Switch. Log into the switch’s Web interface using an account with read-write permissions. Step 2: Create a Certificate. Step 3: Generate a Private/Public Key pair. Step 4: Enable SSH. How do I backup my…