How do you fix a stripped screw hole in an electrical box?

If the hole is slightly stripped, then slipping some type of material in the hole to take up space might do the trick….Given that the box is plastic, you have at least 3 options:

Try a slightly larger screw.
Fill the mounting hole(s) in the box with epoxy, drill a new hole, and re-mount the outlet.
Replace the box.

Can you patch over an electrical box?

Assuming you can, you could place a small piece of drywall in that area, then fill in the gaps with drywall mud. The proper way would be to cut the electricity, remove the box, replace with a single box, do the drywall repair and reconnect the wiring to the single switch.

How do you fix a loose electrical wall box?

First, shut off the electricity and remove the cover. The cover will either have a screw or just snap off. Then completely loosen the box from the wall by unscrewing the top right and bottom left screws. Only turn these screws about 5 to 6 turns.

How do you get a broken screw out of a junction box?

Grab the back of the screws with a pair of 9’s (linesmans pliers) and rotate them through (turn clockwise from the front). If that doesn’t work, you can drill it out carefully with a 5/32″ bit and re-tap the threads with a tapping tool.

What size screw is used for electrical box?

On normal electrical boxes, screws are usually 6-32… this being a bit light for a fan, also expect 8-32 or 10-32. Ground screws are 10-32. It’s not a coincidence that they are -32, given the thickness of standard metal junction boxes, that is the minimum number of threads to properly engage.

How do you cover an unused electrical box?

As long as there are no wires inside the box, you can cover it with drywall. If the box is still acting as a junction box, however, and wires are joined inside it, the electrical code mandates a removable cover. Covers come in plastic or metal, and you attach them with machine screws.

Can you cover an electrical outlet with a mirror?

2 Answers. You’re fine just so long as the receptacles is accessible and as long as you can take the mirror down to service it as need be I don’t see a problem.

How do you fix a broken wall outlet?

Instructions

Turn power to the outlet OFF.
Remove the face plate.
Unscrew and pull out the old outlet.
Remove wires from the old outlet.
Attach new outlet.
Gently push the outlet back into the box.
Screw the new outlet in place.
Attach new face plate.

How do you fix a stripped screw hole in an electrical box? If the hole is slightly stripped, then slipping some type of material in the hole to take up space might do the trick….Given that the box is plastic, you have at least 3 options: Try a slightly larger screw. Fill the mounting hole(s)…