Can you interchange transistors?

So yes transistors are interchangeable, if the type (npn/pnp) and required specs match. If the current through a transistor was only 10mA and they have a part that can tolerate 1A, well, that’s a bit much, and you can find a part that is more suited to what the circuit it.

How do I find a replacement transistor?

Choose a transistor with a similar power dissipation : It is necessary to ensure that the replacement transistor can handle the power that it will dissipate within the circuit. Choosing a replacement transistor with a similar can style will often mean that both transistors have a similar power dissipation.

How to choose a replacement for a bipolar transistor?

Choosing a replacement BJT with approximately the same current gain is necessary.

Frequency. It is usually important to ensure that the replacement BJT can meet any frequency limits or requirements in your device, so it will not affect the function of original application.
Power dissipation.

Are all transistor the same?

There are two ways to see whether one transistor will substitute for another in a specific application. Even if the second transistor is inferior to the first, if it meets the requirements of the application, it will still be OK. there’s a big difference before we look at anything else!

What can replace transistor?

IBM aims to replace silicon transistors with carbon nanotubes to keep up with Moore’s Law. A carbon nanotube that would replace a silicon transistor. Image courtesy of IBM.

How do I know if my electronic components need to be replaced?

Spread some of the electronic devices on a piece of paper on your table or desk.
With the naked eye observe the appearance and shape of the devices.
Examine each device with a hand lens magnifier.
Use a microscope or stereoscope to look for details, especially on the transparent.

What can we use instead of transistor?

Relays: Normally closed relays are all you need to make any logic gate. Normally open relays are also useful. Mag-amps: Magnetic amplifiers could be used to make logic gates similarly to transistor-transistor logic.

Can I replace mosfet with transistor?

In general we can easily replace a BJT with a MOSFET, provided we take care of the relevant polarities. Remove the base resistor from the circuit because we don’t typically need it anymore with a MOSFET. Connect the gate of the N-MOSFET directly to the activation voltage source.

Are there any alternatives to the ss9013 transistor?

Alternative transistors for SS9013 are S9013, S8050, 2N2222, BC337, BC338, output pins of some equivalents are different please see pinout details of the transistor you are willing to replace. SS9013 is a BJT NPN transistor manufactured in TO-92 package.

What are the features of the s9013 collector?

COLLECTOR Features Complementary to S9012 Excellent hFE linearity MARKING: J3 Dimensions in inches and (millimeters)MAXIMUM RATINGS (TA=25 unless otherwise noted) Symbol Parameter Value UnitsVCBO 40 VCollector-Base Voltage VCEO 25 VCollector-Emitter Voltage VEBO Emitter-Base Voltage 5 VIC Collector S9013 Transistor (NPN)TO-92 1.

What are the parameters of the S901 3wtransistor?

S901 3WTRANSISTOR (NPN)SOT323 FEATURES High Collector Current Excellent HFE Linearity MAXIMUM RATINGS (Ta=25 unless otherwise noted) Symbol Parameter Value Unit 1. BASE V Collector-Base Voltage 40 V CBO2. EMITTER V Collector-Emitter Voltage 25 V CEO3.

What are the ratings of the package code sts9013?

Marking Package Code STS9013 STS9013 TO-92 Absolute maximum ratings (Ta=25C) Characteristic Symbol Ratings UnitCollector-B

Can you interchange transistors? So yes transistors are interchangeable, if the type (npn/pnp) and required specs match. If the current through a transistor was only 10mA and they have a part that can tolerate 1A, well, that’s a bit much, and you can find a part that is more suited to what the circuit it.…