Can I use Time Capsule with Windows?

Apple’s Time Capsule is backup device that includes a Router, Wireless Access Point (WAP), Printer sharing, and Disk Sharing so that backups can occur from your computers directly to this device. Although built for Macs, it can be used just as effectively with Windows based laptops and computers.

How do I add a printer to my Time Capsule?

Connect your printer: Plug in the printer to your AirPort Time Capsule or AirPort base station.

If your printer has an Ethernet port, connect your printer to one of your base station’s Ethernet ports.
Otherwise, connect your printer to the USB port on the AirPort Time Capsule or AirPort base station.

Can I connect my Time Capsule directly to my computer via USB?

You can connect to the disk in a variety of ways: If you’re using an AirPort Time Capsule: It already contains an internal disk. If you want, you can connect additional USB disks to the USB port on your AirPort Time Capsule.

How do I use my Time Capsule as a hard drive?

1. Connect to router – First, find an ethernet cable laying around, or disconnect one from your mac. Then, plug one end into the LAN slot <–> of your router. Then, connect the other end into your hard drive / Time Capsule via the WAN port.

Where do I plug my printer into my Time Capsule?

Plug your printer USB cable into the USB port on the back of the Apple Time Capsule and you can now share that printer throughout your network. This means it is now available from all Windows computers. Note: Multifunction printer/scanner/fax devices will NOT work through the Time Capsule.

How to set up time capsule in Windows 7?

Here are Step-by-Step instructions for setting up Time Capsule in your Windows environment. The screen shots and instructions are Windows XP based however they apply to Vista and Windows 7 environments as well. These instructions are as if you’ve just taken the Time Capsule out of the box and set it up for the first time.

What is the IP address for Time Capsule?

If all goes well it should find the Time Capsule device Notice that the IP address is 10.0.1.1, an unlikely address to be seen on Windows networks that often start with 192.168.X.X. If you wish to use this IP address setting, and your Windows computers are all set to receive IP addresses automatically then you can skip to Page 12.

How to change password on Apple Time Capsule?

Page 14 Change the default password to your network standard or something you can remember. Click the SNMP over WAN and uncheck “Allow SNMP over WAN” Page 15 Click Unsecured Wireless Network and click Change Security. This will take you to the Wireless Tab. Make the appropriate changes and click Update.

Can I use Time Capsule with Windows? Apple’s Time Capsule is backup device that includes a Router, Wireless Access Point (WAP), Printer sharing, and Disk Sharing so that backups can occur from your computers directly to this device. Although built for Macs, it can be used just as effectively with Windows based laptops and computers.…