How can I configure EVO Wingle with PTCL router?

Ans.

Plug your Wingle USB into a power source; you would automatically be directed to an online user interface.
Enter the default username and password as “admin”
Go to Settings ———> Wi-Fi security ———> WLAN Basic Settings.
Choose your desired SSID name & your Wi-Fi key to ensure optimal security.

What is the speed of PTCL EVO CharJi?

PTCL CharJi device utilizes CDMA network of PTCL to provide theoretical speed up to 36 Mbps. This is the same technology used by Sprint and Verizon in the U.S.A and PTCL offers vfone service, Evo 3.1/9.3 for internet and now CharJi for much higher internet speed.

How can I increase my PTCL EVO signal?

To get started turn the wires around the antenna, so as to form a spiral around it as shown. The top part should stick out about 10 cms, and then you will need to add some more spirals (three or four) such that they are roughly 5 cm. After that you need to leave a straight wire about 1.5 cm in length.

How do I change my Evo CharJi settings?

Charji Cloud R-500/R-600 or Charji Wingle R-660

Type 192.168.1.1 into your browser.
Go to WAN and click on 4G-3G Modem.
Click on network and change the mode into “LTE Only”
Click on change to save the network type.

How can we use Evo?

With Evo, just find a car, unlock, inspect and hit the road. No need to return the car to the same spot, simply leave Evo in any approved parking space within the Home Zone and you’re done.

What is my PTCL IP address?

Open web browser and type “192.168. 10.1” to get the access of the modem. Following window will pop up; input user name “admin” and password in printed at sticker on the bottom panel of modem(default password is last 5 digits of MAC address). If the connections are Ok, you will be directed to following page.

How can I increase my PTCL WiFi signal strength?

Please follow below guidelines while placing the Wi-Fi router in your home/office.

Place the Wi-Fi router in a central location from where signal can reach all areas of your home/office.
Wi-Fi router should be placed away from other electronics that emit waves.
Place the router in an open space and away from windows.

What is CharJi Evo IP address?

Open the browser, and enter http://192.168.8.1 in the address box. Note: If the IP address conflicts with other IP addresses on the network, the IP address of the CharJi EVO CLOUD automatically changes.

How do I unlock my Evo?

How do I unlock the Evo? You can unlock the Evo that you’ve reserved or any available car on the street using your Evo App or by tapping your Evo card on the windshield reader.

Is there a way to speed check my Evo?

Disable VPN clients and proxy servers if they are not required to establish access to the global network. Speedcheck.pk is a free service for Evo speed check. To start the test, just click the “Start” button. The result will be displayed on the screen in less than a minute.

How is the internet speed on an Evo?

All the EVO devices have limited data bundle packages, but they are super-fast as compared to other devices. If you are a traveler for any reasons so this device will work best for you. It provides you with the speed up-to 9.3 Mbps. We just come up with the new Evo speed test tool which will determine the actual internet speed of the Evo device.

When did the Ookla Speed Test come out?

Ookla Privacy Policy All trademarks of Ookla, LLC, including Speedtest®, are used under license. Computers era started with the invention of computers in early 1950s. The Internet came into existence in 1982 when the TCP/IP protocol was introduced and standardized.

How can I configure EVO Wingle with PTCL router? Ans. Plug your Wingle USB into a power source; you would automatically be directed to an online user interface. Enter the default username and password as “admin” Go to Settings ———> Wi-Fi security ———> WLAN Basic Settings. Choose your desired SSID name & your Wi-Fi key…