How do I access my Cisco DPC3825 router settings?

How do I access my Cisco DPC3825 router settings?

Cisco DPC3825

1. Connect your device to your Wi-Fi modem:
2. Open a web browser and key in 192.168.0.1 in the address bar and press Enter.
3. Enter the following default settings to access the modem settings and select Login:
4. Select Setup from the menu at the top of the page.

What is Cisco default IP address?

192.168.1.1
Figure Out the IP Address If your Cisco Business router is new, the default IP address is 192.168. 1.1. If you can’t remember the IP address or you don’t have a special configuration, use an open paperclip to press the reset button on your router for at least 10 seconds while it is powered on.

How do I know if an IP address is convergent?

On your browser, type in 192.168. 0.1 and wait for the window to load your Converge admin portal platform.

How do I reset my Cisco modem?

Using the modem’s Reset button:

1. Locate the Reset button the back of the modem.
2. Press and hold the Reset button for 10 seconds.
3. After 10 seconds, release the button. The modem should restart and the lights will flash.
4. Once the modem is finished restarting and is online the settings will be back to default.

How do I find my cisco IP address?

You can view the IP address of Cisco phones within its menu settings.

1. Press the Menu or Setup (gear or folded paper icon) button.
2. Select Status.
3. Under Network Status or Network, the IP address will be displayed.

How do I assign an IP address to a Cisco router?

Configure an IP address on a switch

1. enter the VLAN 1 configuration mode with the interface vlan 1 global configuration command.
2. assign an IP address with the ip address IP_ADDRESS SUBNET_MASK interface subcommand.
3. enable the VLAN 1 interface with the no shutdown interface subcommand.

How do you bridge a router to a modem?

1. Connect your computer’s LAN port to your gateway router’s ethernet port. You may also connect to the gateway router over Wi-Fi.
2. Type your username and password to sign in.
3. In the left pane, click Wizard.
4. Set the connection type to Bridge, and complete the connection wizard.
5. Click Save.
6. Restart your gateway router.

What do the lights on my Cisco router mean?

Solid Green Light: Indicates that the upstream channel is connected. Flashing Light indicates the modem is scanning for an upstream connection. Solid Green Light: Indicates that the modem is now online. Flashing indicates the modem is scanning for network connectivity.

How do I access my Cisco DPC3825 router settings? Cisco DPC3825 Connect your device to your Wi-Fi modem: Open a web browser and key in 192.168.0.1 in the address bar and press Enter. Enter the following default settings to access the modem settings and select Login: Select Setup from the menu at the top of…