How do I reset my Cisco WRT54G2 router?

How do I reset the Linksys WRT54G2 to factory default settings? To reset the router to factory default settings, press the Reset button for 10 seconds while the device is powered ON.

How do I reset my password for my wireless router?

To change your router’s password:

Enter your router’s IP address into your favorite web browser.
Log in with the default username and password (both admin, usually).
Go to settings.
Select Change Router Password or a similar option.
Enter the new password.
Save the new settings.

How do I configure my Cisco Linksys WRT54G2 v1?

First you connect to your Linksys router. Then go to http://192.168.1.1 and type in “admin’ as your password in to log in window and click “log in’. then go to the “wireless’ tab and enter your wireless network name. In the wireless channel select ’11 2.462GHz’ and click save.

How do I reset my Linksys wrt54g router username and password?

To reset your router, use the following steps:

Press the reset button for 30 seconds.
Open up your Web browser and enter “192.168. 1.1” in the address bar.
For the login, leave a blank ID and enter “admin” as the password.

How do I Reset my Linksys router WRT54G2 default password?

There are two ways to reset the Linksys WRT54G2 to factory defaults. 1. Press and hold the Reset button for approximately 10 seconds, and release it after that. or. 2. Log in to Web Interface, Go to Administration > Factory Defaults tab and reset. Tweet.

What is the SSID of the WRT54G2 router?

The default wireless network name (SSID) of the WRT54G2 is linksys. 2. What security modes does WRT54G2 support? The router supports six (6) security modes: Wi-Fi Protected Access (WPA) Personal, WPA2 Personal, WPA Enterprise, WPA2 Enterprise, RADIUS, and Wired Equivalent Protocol (WEP). 3.

How can I Reset my router to factory settings?

Use the following steps to reset the router using this method: Open your Web browser and enter the IP address of your router. Enter your user ID And password when prompted. At the top of the Web page, click “Administration” and then “Factory Defaults”. Beside “Restore Factory Defaults”, click “Yes”.

How to set up a Linksys wireless router?

Log in to the web-based setup page of your router by entering “192.168.1.1” on the Address bar of your web browser. Once a pop-up window appears, leave the default username blank and enter “admin” for the password. Go to the Wireless tab > Wireless Security sub-tab.

How do I reset my Cisco WRT54G2 router? How do I reset the Linksys WRT54G2 to factory default settings? To reset the router to factory default settings, press the Reset button for 10 seconds while the device is powered ON. How do I reset my password for my wireless router? To change your router’s password:…