How do I reset my EdgeRouter?

How do I reset my EdgeRouter?

GUI: Access the EdgeRouter Web UI.

1. Navigate to the System tab in the bottom-left of the Web UI.
2. Reset the configuration to defaults by pressing the Reset to Default button in the Reset Config to Default section.
3. The EdgeRouter will prompt for a device reboot to complete the reset.
4. Wait for the reboot to complete.

What is an edge router used for?

An edge router is a specialized router located at a network boundary that enables an internal network to connect to external networks. They are primarily used at two demarcation points: the wide area network (WAN) and the internet.

How do I configure my edge router?

Log into the Router

1. Turn on the router.
2. Connect a laptop to the eth0 port on the router.
3. Change the laptop configuration to static IP:
4. •
5. •
6. Open a Web browser and type the IP address of the router: 192.168.1.1.
7. If a warning message appears, click Advanced.
8. Enter the username and password for the router:

What does an edge router do?

How do I configure my Edgemax router?

Establishing Initial Connectivity

1. Connect an Ethernet cable from a computer to the eth0 interface on the EdgeRouter.
2. Configure a static IP address on your computer in the 192.168.
3. Open a Web Browser and enter https://192.168.1.1 in the address bar.
4. Log into the router using the default credentials.

How is the edgerouter on an ER-X powered?

The EdgeRouter can be powered by either method: Passive PoE output on port eth4/PoE Out works as a passthrough and depends on the input power source. If the included Power Adapter (12V, 0.5A) is used, there may not be sufficient passthrough to power another device because the EdgeRouter can consume up to 5 watts on its own.

What is the Ubiquiti edgerouter x Ethernet router?

Ubiquiti Networks introduces the EdgeRouter X, part of the EdgeMAX platform. The EdgeRouter X combines carrier-class reliability with excellent price-to-performance value in an ultra-compact form factor. Two models of the EdgeRouter X are available. The standard model, the ER-X, can be powered by an external power adapter or 24V passive PoE input.

How do I connect my Ethernet cable to my edgerouter?

Connect an Ethernet cable from the Ethernet port on your computer to the port labeled eth0/PoE In on the EdgeRouter. If you are using PoE, then connect your computer to the EdgeRouter via a PoE switch or to the adapter’s LAN port. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet.

What kind of Poe adapter does the edgerouter X use?

PoE Versatility Two models of the EdgeRouter X are available. The standard model, the ER‑X, can be powered by an external power adapter or 24V passive PoE input. A passive PoE passthrough option1 is available to support a single airMAX® device2. The SFP model, the ER‑X‑SFP, is powered by an external power adapter.

How do I reset my EdgeRouter? GUI: Access the EdgeRouter Web UI. Navigate to the System tab in the bottom-left of the Web UI. Reset the configuration to defaults by pressing the Reset to Default button in the Reset Config to Default section. The EdgeRouter will prompt for a device reboot to complete the reset.…