How do I reset my Potterton boiler?
How do I reset my Potterton boiler?
- Reset. bar.
- Off position. The boiler will not operate.
- Central heating. and hot water. Both heating and. hot water will operate.
- Hot water. Hot water will operate.
- Reset. Hold for approximately. 5 seconds and release.
Why is my boiler flashing blue Potterton?
What does the E118 fault code mean on my Potterton boiler. In this instance, the E118 being displayed relates to low boiler pressure. Your boiler and central heating system needs a certain level of water (and therefore, pressure) in the system, to be able to work correctly.
Why is my boiler showing E133?
What do Baxi error codes E133 or E28 mean? If your boiler has shut down and is showing error code E133 or E28, then your condensate pipe may be frozen. Switch your boiler off at the control panel, and turn off the electricity at the wall. Find where the pipe is frozen, usually the most exposed part of the pipe.
What does E133 mean on my boiler?
gas supply has been interrupted
E133. Indicates that the gas supply has been interrupted, ignition has failed or the flame has not been detected. Ensure that the gas supply has not been turned off, and turn the selector switch to the reset position and hold for at least 5 seconds. If the boiler does not relight, or the code is displayed .
Why is my Potterton boiler not igniting?
Like most boilers, fan faults like this on a Potterton can be narrowed down to: Loose or damaged wiring – the circuit board isn’t receiving the signal it needs. A faulty air pressure switch – the switch is sending the wrong signals to the boiler.
Why does my Potterton boiler keep locking out?
If your Potterton boilers pressures drop too low, it will stop working and display the E119 error code. If this thermostat operates the boiler will lockout and the Status LED will flash Red once a second. Loose connection on leads to overheat cut off device.
Why does my Potterton boiler keep cutting out?
#5 Problem: Boiler Turning Off or Locking Out If your boiler keeps “locking out” with no obvious cause or error code being displayed, then this could be caused by a variety of different issues, including a faulty heat exchanger, faulty thermostat, or a faulty PCB.
What does Error 1 mean on a boiler?
The F1 error code tells you that your boiler is losing pressure and is now low on pressure. This may be caused by: Water leaking from the pipes. Water leaking your radiators. A leak in the the boiler itself.
What does Potterton fault code E133 stand for?
The E133 fault code relates to a gas issue, and that could be potentially dangerous. Your boiler engineer will be able to fix the problem, and only then will they reset your boiler for you. The most obvious check (and recommended by Potterton), is to check whether other gas appliances are working.
What does E133 mean on a Baxi boiler?
E133 error code on a Baxi/ Potterton / Main boiler is an ignition lockout fault code. This error code that covers a wide range of possible faults connected to gas and igniton. In most cases you will need to contact a competent boiler repair engineer but there are some steps you can take yourself before booking a repair:
What does the fault code E133 mean on a boiler?
The E133 fault code relates to a gas issue, and that could be potentially dangerous. Your boiler engineer will be able to fix the problem, and only then will they reset your boiler for you.
How does a fault code work on a Potterton boiler?
All modern Potterton boilers have a fault code system. When a problem occurs, the boiler’s printed circuit board (PCB) selects the most probable cause of the fault and converts that to a fault code. This is then shown on the display panel.
How do I reset my Potterton boiler? Reset. bar. Off position. The boiler will not operate. Central heating. and hot water. Both heating and. hot water will operate. Hot water. Hot water will operate. Reset. Hold for approximately. 5 seconds and release. Why is my boiler flashing blue Potterton? What does the E118 fault code…