How do you finish DensArmor plus?

The finishing and sanding of DensArmor Plus® Interior Panels should be performed in accordance with the most current version of Gypsum Association Publication GA-214 “Recommended Levels of Gypsum Board Finish.” Joints between DensArmor Plus panels may be finished with either paper tape embedded with all-purpose joint …

Where is DensArmor plus used?

DensArmor Plus® Interior Panels They’re ideal for areas prone to high humidity such as basements and residential bathrooms, and are ideal for commercial pre-rock installations. They are designed for direct attachment with screws or nails to wood and metal framing or existing surfaces.

Can DensArmor be painted?

To maximize the mold-resistant benefit of the DensArmor Plus Interior Panels, a 100% acrylic primer with mildecide should be used. 6. High-quality flat or satin paint should be applied over the primer.

Can DensGlass be used on interior walls?

DensGlass Sheathing is not intended for interior or exterior tile applications. For interior tile applications, consult our DensShield® Tile Backer brochure. DensGlass Sheathing should not be used in lieu of plywood where required. Do not apply DensGlass Sheathing below grade.

Is DensArmor plus fire rated?

DensArmor Plus Fireguard exhibits 15 flame spread as tested per ASTM E 84 or CAN/ULC S-102. A specially formulated gypsum core that includes glass fibers allows DensArmor Plus Fireguard to help protect framing members and prevent or delay the spread of fire.

What is paperless drywall?

Paperless drywall is similar to traditional drywall in that it also contains a gypsum core. The difference is that instead of using paper as an outer wrapping, fiberglass is used instead. The gypsum core in paperless drywall is also water-resistant, unlike the core of traditional drywall.

Can DensGlass be used as structural sheathing?

DensGlass panels also protect and help stabilize structural framing. DensGlass Sheathing is extremely resistant to rippling, buckling and sagging, even under humid conditions—which makes it particularly suitable for soffits.

Can Densshield be painted?

The nontiled areas can be primed and painted with the same finish used on the other walls in the room as long as the primer and paint are suitable for high-moisture areas.

Can you plaster over DensGlass?

You can install stucco over DensGlass for a long lasting finish. DensGlass exterior sheathing is a paperless board that prevents moisture wicking and the interior of your home from becoming exposed to the elements.

What is ASTM c1396?

This specification covers gypsum boards which include the following: gypsum wallboard for use on walls, ceilings, or partitions and that affords a surface suitable to receive decoration; predecorated gypsum board for use as the finished surfacing for walls, ceilings, or partitions; gypsum backing board, coreboard, and …

What makes densarmor plus interior panels resist mold?

DensArmor Plus® Interior Panels, which feature fiberglass mats instead of the paper facings used on the surface of traditional gypsum board products, resist mold growth.

Where can I find densarmor plus building mat?

DensArmor Plus® is listed in FEMA Technical Bulletin TB-2, “Flood Damage-Resistant Materials Requirements for Buildings Located in Special Flood Hazard Areas in accordance with the National Flood Insurance Program”, (page 7, table 2). Dose this mat contain any biocides? Is it VOC free or certified?

Can you use densarmor plus below base flood elevation?

Thank you for shopping Home Depot. Yes, DensArmor Plus® is a non-paper faced gypsum board and is acceptable in areas below base flood elevation.

Which is better densarmor or paper faced gypsum?

When properly used with good design, handling and construction practices, DensArmor Plus Interior Panels provide increased mold resistance compared to standard paper-faced gypsum products. For additional information, visit our Product Fire, Safety and Use Information page.

How do you finish DensArmor plus? The finishing and sanding of DensArmor Plus® Interior Panels should be performed in accordance with the most current version of Gypsum Association Publication GA-214 “Recommended Levels of Gypsum Board Finish.” Joints between DensArmor Plus panels may be finished with either paper tape embedded with all-purpose joint … Where is…