How do you install a door that swings both ways?

How do you install a door that swings both ways?

Remove the blocks and allow the door to swing in the opposite direction. If the door swings too easily, insert a hex wrench into the holes on the bottom of both small double-action hinges. Use the hex wrench to turn the end of the cylinder clockwise, tightening the spring. Do both hinges the same way.

What is a door called that swings both ways?

double acting door
A double acting door, also known as a double swinging door or impact traffic door, is a single door or a pair of doors in which the door(s) is able to swing in both directions.

What is a gravity hinge?

Toilet Partition Door Hinges Also known as gravity hinges, the weight of the door returns these hinges to a closed position without the help of springs. A pair includes one hinge for the top of the door and one for the bottom of the door.

Where to put double acting hinges on doors?

Guide lines for Double Acting Spring Hinge Locations on Doors. It is advisable to use three hinges on each door. The center hinge should be installed as close as possible to the top hinge for maximum support. Installing Double Acting Spring Hinges on Double Doors.

How do you Mount double action spring hinges?

To properly mount spring hinges, it is necessary to release the tension on the springs. Insert the tension rod into one of the adjustment holes on the tension lug and turn it so that the tension pin can be easily removed.

How to choose the right spring hinge for your door?

For help selecting the proper size double acting spring hinge for your doors size and weight see: Bommer Double Acting Hinge Selection Charts . Guide lines for Double Acting Spring Hinge Locations on Doors.

Where to place a double action door frame?

Once you know that the metal fastener can lay flat on the door frame, measure 3 inches from the top of the door frame to mark where the top of the first double hinge will rest, and 7 inches from the bottom of the frame to mark where the bottom of the second hinge will rest.

How do you install a door that swings both ways? Remove the blocks and allow the door to swing in the opposite direction. If the door swings too easily, insert a hex wrench into the holes on the bottom of both small double-action hinges. Use the hex wrench to turn the end of the cylinder…