How do you put numbers on a Laser sail?

How do you put numbers on a Laser sail?

Place the number within the pencil outline and press down to stick the peeled back area . Lift the remainder of the number and slowly peel off the backing as you smooth the number onto the sail, taking care to remove air bubbles and creases as you go .

How are sails numbered?

Sail numbers are generally assigned in consecutive order. They are assigned by either the builder, class association (for inland competitive racing), or national authority (required for offshore racing yachts). If you don’t compete you may assign your own number. It’s simple enough I guess.

Where is the Laser hull number?

For many years, this number has been printed on a plaque placed on the aft end of the Laser cockpit. Although the plaque design has changed over time, the function has remained the same: identifying each Laser as an IYRU/ISAF/World Sailing recognized class legal hull and specifying the sail number for that boat.

How do you tell what year a Laser sailboat is?

To determine the age of your laser dinghy, you will first have to check the number embedded in the hull. Usually, it is located beneath the bow eye or in the transom.

What should I look for in a used Laser sailboat?

If the boat has been used and you’re not sure of its condition, you will want to do a thorough inspection before the purchase. You’ll need to inspect the boat’s hull, foils, trailer, sails, rigging, and hardware. You should also make sure that you have all the necessary safety equipment to sail safely.

How do you remove numbers from a sail?

Removing the Old Numbers

1. Peel off the old numbers.
2. To remove the sticky residue, use 3M™ Adhesive Cleaner. Apply solvent to a soft cloth and rub over the adhesive until the solution can soak in. Leave the sail for a bit while the solvent soaks in.
3. Using a terry cloth or other soft towel, scrub off the glue residue.

How tall are the letters on a laser sail?

The numbers and letters on a sail shall have the same dimensions. The numbers and letters for the Standard and Radial sails (min height 300mm) are larger than those on the Laser 4.7 sail (min height 220mm). May I use any number I choose on my sail? NO.

How big are the numbers and Letters on a sail?

The numbers and letters on a sail shall have the same dimensions. The numbers and letters for the Standard and Radial sails (min height 300mm) are larger than those on the Laser 4.7 sail (min height 220mm).

Where are the starboard side numbers on a laser sail?

The first starboard side number must just touch the 100mm line. There is a +/- 12 mm tolerance on this measurement. When you have finished the starboard side numbers turn the sail over and draw the a new horizontal Base Line and a new for the port side numbers.

What to use to make a laser sail?

A well-sharpened pencil, a measuring tape, a good straight edge at least a meter long and an eraser to remove pencil lines and marks if you wish. If you use light lines and mark you can leave them on the sail as they will not be seen from 10 meters away.

How do you put numbers on a Laser sail? Place the number within the pencil outline and press down to stick the peeled back area . Lift the remainder of the number and slowly peel off the backing as you smooth the number onto the sail, taking care to remove air bubbles and creases as…