How do you replace the cable on a grandfather clock?

To remove, lift the cable up from the oblong hole on the drum and slide it over to the big side. The cables have ends made of brass attached to them. These get slide over from the small side of the slot on the cable drum to the larger slot. It will then be released and removed from the clock movement.

How much is a broken grandfather clock worth?

Expect that your grandfather clock could be worth anywhere from $200 to $20,000 depending on the features and the condition of the clock.

Is it expensive to repair a grandfather clock?

The cost of servicing a grandfather clock can vary between $100 and $2,500, depending on what services are necessary. Normal servicing is not too costly while repairing and replacing parts can quickly add up. Major factors that impact the cost include: The type of clock and internal mechanisms.

How do you silence a Chimes grandfather clock?

Take a look at the clock controls. Look for a lever or setting called “Chime Silent” or similar. The setting may be on the clock face and not near other controls. If you’d like to shut down the Westminster or other chimes, select the “Silent” option.

How do you hang weights on a grandfather clock?

Grandfather clocks are weight driven. Pick up the weights one at a time and turn them upside down. Look for the letters “L,” “R,” or “C.” Arrange them left to right on the floor in front of the clock with “L” being the left hand weight, “C” being the center weight and “R” being the right hand weight.

What makes a grandfather clock valuable?

Craftsmanship. A big reason why the clocks are so expensive, and also why they’re so coveted, is because of the talent and craftsmanship that goes into them. A lot of skilled labour goes into making a masterpiece like a grandfather clock.

Where should I put my grandfather clock?

“They do best in a room that’s comfortable for everyday living, not too hot or cold, and not too damp or dry. These clocks are susceptible to extreme fluctuations in humidity and temperature. And just like other fine pieces of furniture, the fluctuations can cause the wood to swell and shrink.”

How often does a grandfather clock need to be serviced?

For tall case clocks, such as grandfather clocks, we offer on the site service at reasonable rates. How often should my clock be cleaned? Your clock should be professionally cleaned every 8 to 10 years. Having your clock cleaned will assure you of keeping your heirloom in top condition for years to come.

Should the weights on a grandfather clock drop evenly?

The weights on my grandfather clock aren’t coming down evenly. If your clock is not silenced, or doesn’t have that feature, check to see that the weights are hanging on the correct chains or pulleys. The heavier weight should be on the right hand side as you face the clock.

How do you change the cable on a grandfather clock?

(Tubular Bell movements are an exception) Changing a clock cable requires the movement to be removed from the clock case. These instructions refer to post WW2 modern grandfather units of German origin, however all makes have a similar method. Swapping the cable is easy. There is a big hole and a little hole on the cable mount.

Why are the weights on my grandfather clock stuck?

The Grandfather clock weights can get stuck in the high position if over wound. Some larger clocks have over wind protection to prevent this. The grandmother and grandfather chain drive units often do not have this feature. When winding the weights up make sure the top of the weight can be seen when done.

Is it cheap to buy a grandfather clock?

Grandfather clock Weights are not cheap mainly because they are so heavy to keep, ship, store, move from here to there. Sure one weight set of three is less than 30 lbs but that adds up quickly in a stack of weight sets. With that said, we don’t want to ship these back and forth.

How big is the pulley for a grandfather clock?

Solid brass cable pulley for Hermle / Urgos / Kieninger mechanical clock movements. Available in two sizes 1 3/4 inch diameter or 1 1/4 inch diameter.

How do you replace the cable on a grandfather clock? To remove, lift the cable up from the oblong hole on the drum and slide it over to the big side. The cables have ends made of brass attached to them. These get slide over from the small side of the slot on the cable…