How do you use UPOL GRAVITEX?

Apply with a clean Schutz gun or brush. Allow approximately 10- 15 mins. for the solvent to flash off when building a thick coat. GRAVITEX PLUS is supplied ready for use.

What is UPOL GRAVITEX?

A hard, durable underbody coating that can be used to reproduce the manufacturers original stone chip protective finish. Sound and vibration dampening makes it ideal for use inside compartments and panels.

What is GRAVITEX?

GRAVITEX is a tough, hard, durable coating designed to protect against stone chips, salt, damp and rust. GRAVITEX will also help to deaden sound and vibrations and is, therefore, ideal for application to panels and inside engine compartments.

How long does GRAVITEX take to dry?

Drying Time Approximately 2 hours at normal shop temperature or 30 minutes at low bake 180ºF (80ºC). Drying time is dependent on film thickness, humidity and temperature.

Can you thin stone chip?

Spraying on body panels The stonechip primer can be thinned with approximately 1 part paint to 0.7 parts cellulose thinners, then sprayed with a conventional spray gun. The finish is quite thick and fairly flat, and the stonechip primer and overspray can be sanded to a smooth finish prior to overcoating.

Can you brush on UPOL Gravitex?

you can brush gravitex too. I use it with a stippling (dabbing) action rather than a normal brushing action. I use 3 coats at one day intervals and get a finish like this.

Can you brush on Gravitex?

What is UPOL raptor?

U-POL is a World leader in automotive refinishing products specialising in fillers, coatings, aerosols, adhesives and paint related products. RAPTOR Tough and Tintable Protective Coating is a durable urethane coating that provides surfaces with a protective barrier that can withstand the toughest situations.

How long does stone chip take to dry?

The product can be sprayed haze free and does not drip. Drying times (for coating of 700 microns wet film thickness) Touch dry – approximately 45 minutes (@ 20 deg C, 65% relative humidity) Completely dry – approximately 2 hours (@ 20 deg C /65% r.h.) Forced drying – approximately 45 minutes (@ 60 deg C.)

Can you paint over tetrosyl stone chip?

Stone chip is not suitable for use on synthetic painted surfaces. Stone Chip may be applied with a roller or brush but drying times may be affected.

Does Stone chip paint need primer?

Yes you will need to prime it as jd said. The link below may be of help for painting door edges.

Is Stone chip paint waterproof?

Stone Chip is waterproof, so as long as you have covered the surface completely it should be fine.

How do you use UPOL GRAVITEX? Apply with a clean Schutz gun or brush. Allow approximately 10- 15 mins. for the solvent to flash off when building a thick coat. GRAVITEX PLUS is supplied ready for use. What is UPOL GRAVITEX? A hard, durable underbody coating that can be used to reproduce the manufacturers original…