What do I do when my HP printer says paper jam but there is none?

What do I do when my HP printer says paper jam but there is none?

Reset the printer, which might clear a false paper jam error, and then try to print again.

1. With the printer turned on, disconnect the power cord from the printer.
2. Unplug the power cord from the power source.
3. Wait 60 seconds.
4. Reconnect the power cord to a wall outlet and to the printer. note:

How do I clear a paper jam in my printer?

Paper Is Jammed in the Paper Output Slot or the Rear Tray

1. Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier.
2. Open the Rear Cover.
3. Pull the paper out slowly.
4. Close the Rear Cover.
5. Reload the paper, and press the RESUME/CANCEL button on the printer.

How do you fix a false paper jam?

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. Remove USB cable, if present. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Why does it say paper jam when there is no paper jam?

If the paper is even slightly askew, the rollers will pick it up a little crooked, and — guess what — the crooked sheet will immediately get jammed. So even though there’s no paper stuck when you start printing, the loose paper guides are ensuring that a sheet gets jammed whenever the printer starts doing its thing.

Why does my printer jam every time?

If your printer keeps jamming, you should know that the most common cause of a jam is misalignment of the paper. Paper needs to load in smoothly, completely flush with the tray. Overfilling the tray is a great way to ensure you will be spending some personal time getting to know the inside of a printer.

Why do I keep getting paper jams?

So here are the most common causes: Paper inserted incorrectly. Sheets stuck together, folded or frayed paper, and an overloaded tray can all create problems. Even using the wrong type of paper can cause paper jams.

How do I fix my selphy paper jam?

Follow these steps if paper jams in your SELPHY ES1.

1. Turn the printer OFF and unplug the machine.
2. Remove the cover below the paper-handling slot. (To do so, lay the printer down, place your fingers on the sides of the cover, and lift up).
3. Slowly remove the paper to avoid tears, then re-attach the cover.

How do you fix a constant paper jam?

Jam session

1. Make sure your device’s paper is correctly loaded into the slot or tray.
2. When you reload your input tray, pay attention to the tray’s needs.
3. If your device has a paper tray, do not overload it.
4. Use only one kind of paper at a time in your input tray.
5. Fan the stack of paper that you’re about to load.

Can a paper jam ruin a printer?

Do not just assume the issue you’re facing is that the paper is jammed, as dismantling and meddling inside the printer unnecessarily could cause further damage that could be lengthy, and costly, to fix.

How do I clean my Selphy printer?

Cleaning the Inside of the Printer (SELPHY ES3 / ES30)

1. Remove the ink cassette. Open the ink cassette compartment cover.
2. Insert the cleaner stick all the way in the ink cassette compartment and slide it in and out 2 or 3 times. Important!
3. Replace the ink cassette and try printing again.

How do you remove a paper cassette from selphy?

Slide the translucent top cover of the Paper Cassette back to expose the paper storage area. With the top half pulled back, lift the glossy side and open the Cassette.

How do I clean my Canon Selphy cp900?

How to clean the back side of the printer

1. Detach the [Ink Cassette].
2. Move the upward. Detach the [Ink Cassette].
3. Remove dust on the .

What do I do when my HP printer says paper jam but there is none? Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source. Wait 60 seconds.…