What do you do when your DStv decoder wont turn on?

Decoder Showing Red Light And No Signal Being Sent To TV After Load Shedding

You need to switch off your DSTV Decoder from the plug.
Remove the decoder power cable from the power source.
Unscrew the white cable at the back of the decoder coming from the LNB.
Leave cables unplugged for a period of 3 minutes.

Why is my DStv decoder showing red light?

A common error when the red light comes up is the smart card setup. If you insert your smart card incorrectly, it will bring this indication. All you need to do is remove, dust, and re-insert your smart card. This should fix the problem and if it persists, just reboot the decoder.

How do I fix a corrupted DStv hard drive?

Insert the power cable, and don’t let go of the power button as your decoder powers up. It will bring up the word “CODE,” and to repair the corruption, press P-P+P-P+ on your remote. It will begin to format all the data on your decoder, and when it is done, it will reboot itself.

What happens when I reset my DStv decoder?

A lot of people want to know why and how they can reset a DStv decoder. Resetting your decoder can fix corrupt software. Also, if you mess up the correct configurations of the decoder you can always restore the default factory settings by resetting your decoder.

Why is my decoder showing no signal?

Step 1: Check whether the cables connecting the decoder are in place. Checking the cables connecting the decoder is the first and easiest thing to consider if you experience a signal loss when watching your TV. Check the cables visually to ensure that they are intact. Often, loose cables can lead to poor strength.

Why does my DStv HD decoder keeps rebooting?

The main cause of the DStv Explora 2A keeps rebooting problem is a damaged DStv software. Often, Multichoice releases new decoder systems, and you can download them when you connect your decoder to the internet.

How do I manually reset my DStv decoder?

How to reset your DStv decoder

Press the blue “DStv button” on your remote control.
Then use the right arrow on the remote control to go to “Settings“.
Use the down arrow to go to “System Settings“.
Now use the right arrow to go to the next menu and select “Reset Decoder Settings“

Why is my DStv decoder switching off?

How do I fix my DStv Explora reboot?

Hold the POWER button on your decoder down, till the front panel shows a blank screen 2. Then hold down the P+ button, until CODE appears on the front panel 3. Then press: P- (0 will appear on the front panel) 4. Then press P+ (01 will appear on the front panel) 5.

How do I reset my DStv decoder without the remote?

Process of how to reset DStv decoder without remote Turn it back on and press the reset button on your decoder. It is marked and located on the front panel, making it very hard to miss. While you press the button, use your phone to dial the reset prompt from Multichoice.

What do you do when your DStv decoder wont turn on? Decoder Showing Red Light And No Signal Being Sent To TV After Load Shedding You need to switch off your DSTV Decoder from the plug. Remove the decoder power cable from the power source. Unscrew the white cable at the back of the decoder…