What is cnMedusa?

What is cnMedusa?

cnMedusa is a first-of-its-kind technology in a fixed wireless broadband access platform. The 450m utilizes massive Multi-User MIMO technology in a cost-effective solution.

What does a subscriber module do?

Customer premises equipment (CPE) device that extends network or Internet services by communication with an Access Point Module or an Access Point cluster.

What is cambium subscriber module?

Now available in most popular global bands, 2.4, 3.5, 3.65 and 5 GHz, the PMP 450 Subscriber Module (SM) supports tiered service models. Software defined upgrades allow throughput from 4 Mbps to over 100 Mbps to improve revenue optimization.

What is cambium ePMP?

ePMP Overview Built on the combined feature set of the ePMP 1000 and 2000, ePMP 3000 adds industry-leading throughput. Featuring a 4X4 access point and sector antenna, ePMP 3000 combines self-interference mitigating GPS synchronization with interference mitigation and combines it with Multi-User MIMO technology.

What is a cambium SM?

The cnRanger™ Subscriber Modules (SM) are highly compact and cost-effective LTE Customer Premise Equipment (CPE) designed for ease of installation, onboarding, management, and monitoring.

What PMP 450?

The Cambium Networks PMP 450 is our industry-leading wireless access network platform. Designed for fixed outdoor applications, the PMP 450 platform is optimized for rate, reach, reliability and throughput. It features the most resilient and effective set of wireless broadband technologies in the marketplace.

How do I reset cambium ePMP 1000?

The ePMP 1000 Hotspot supports the same two methods of resetting a device to factory default as the regular ePMP firmware. To reset to factory you can either: While the device is powered on, hold the reset button (located near the Ethernet port connectors) for 10 seconds.

What does ePMP GPS synchronization use for timing?

A stable timing source is utilized by every AP in the system to precisely synchronize the start of every transmit and receive cycle within the TDD framing structure used in the Cambium Networks ePMP solution.

What is the default IP address for the subscriber module?

169.254.1.1
The subscriber module is programmed to utilize the local IP address of 169.254. 1.1.

Which PMP 450 device can be deployed as an access point and a subscriber module?

INDUSTRY-LEADING SPECTRAL EFFICIENCY PMP 450m Access Points are compatible with all 5 GHz and 3 GHz subscriber modules including 450b, 450i, and legacy 450).

How do I reset my Force 200?

To reset the device (briefly depress the button for more than two seconds but less than ten seconds then release). Caution: If the reset button is pressed for more than ten seconds while powered on, the device will reset back to its factory default configuration.

Is the PMP 450 compatible with the Legacy 450?

PMP 450m Access Points are compatible with all 5 GHz and 3 GHz subscriber modules including 450b, 450i, and legacy 450). cnMedusa™technology enhances sector capacity by combining a smart beamforming antenna array with multiple RF transmit and receive chains, effectively multiplying available capacity by more than three times.

What are the features of the PMP 450 AP?

PMP 450 APs, and the PMP 450 platform in general, offer a vast feature set including extensive L2 management capabilities, highly configurable channel width & spacing, and a host of other parameters. The PMP 450i access point include ultra-wide band support for the entire 4.9-5 GHz and 3 GHz bands.

Which is PMP 450 radio does cambium use?

Cambium Networks industry-leading 450 platform includes the all new PMP 450i and PTP 450i radios. The 450i product platform is the most scalable industrial-grade wireless broadband solution available. PMP 450 MicroPoP Omni Fixed Wireless Access Point

What are the unlicensed bands for PMP 450?

In addition to 5 GHz and 3 GHz, the PMP 450 platform is also available in the 900 MHz, 2.4 GHz unlicensed bands as well as 4.9 GHz.

What is cnMedusa? cnMedusa is a first-of-its-kind technology in a fixed wireless broadband access platform. The 450m utilizes massive Multi-User MIMO technology in a cost-effective solution. What does a subscriber module do? Customer premises equipment (CPE) device that extends network or Internet services by communication with an Access Point Module or an Access Point cluster.…