What is E2 error in washing machine?

If the LED Lights are flashing with an E2, 5C or 5E error, it is an indication of water drainage issue. Water is not draining from the drum. To resolve the error issue, check the following: • Check drainage pump filter for blockages (e.g. lint, coins hair, clips)

How do you fix an E2 error on a top load washer?

Haier error E2 Make sure that there’s no laundry stuck between the washing machine and the door. If the washing machine is completely full, the drum may be overloaded. In that case, just take out some clothes. Finally, check the child safety lock.

How do you diagnose a washing machine fault?

Washer Troubleshooting Guide

Check that the washer is plugged in securely.
Check the circuit breaker or fuse box.
Test the outlet for current.
Check that the water supply valves are turned on.
Inspect the filter screens.
Test for overheating.
Test the water level switch.
Test the timer control.

How do I fix E2 error?

Remove the filters and wash them properly with water. If the indoor fan blower is dirty or defective, your AC is likely to show an E2 error. In this case, you need to remove it. To fix it, the blower either needs to be cleaned properly or if it has been damaged, it will require replacement.

What does F5 and E2 mean on a washing machine?

The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.

Can we run AC with E2 error?

“E2” – Low Pressure: The pressure of the compressor is too low. The ‘Error’ LED will be on. Solution: Clean filters & coils. Check evaporator/condenser coils.

What is an E2 error code on a Midea top load washer?

ERROR CODE DEFINITION: Not enough water pressure. ERROR CODE SOLUTION: Make sure to turn on water tap, or increase water flow to washer. Midea Top Load Washer Error Code: E2 ERROR CODE DEFINITION: Draining not finished correctly.

Where can I find the fault code on my washing machine?

These fault codes are for top loading washers and front loading washers. This list may not include your specific error code. If you cannot find your washing machine brand and or error code below, go to the bottom of the page and ask us.

What does it mean when your washing machine says E5?

From the database we are using, the error code E5 on your washer means there is a malfunction with the motor. (You may want to consult your users manual to be sure the error code we have supplied is correct.) Have a look at the motor and be sure the connections are tight and test to see if it is getting power.

What does E3 mean on a Bosch Maxx front load washer?

Bosch Maxx Classic Front Load Washer error code E3 means the door isn’t being registered as closed. This is normally due to a faulty door interlock switch or wiring issue. Check wiring and if needed, Change out door interlock switch.-RR

What is E2 error in washing machine? If the LED Lights are flashing with an E2, 5C or 5E error, it is an indication of water drainage issue. Water is not draining from the drum. To resolve the error issue, check the following: • Check drainage pump filter for blockages (e.g. lint, coins hair, clips)…