What is the difference between a Sanden 508 and 709?
What is the difference between a Sanden 508 and 709?
The 508 series Compressors are made at the Sanden facility in the Republic of Singapore and the 709 series Compressors are made in the USA. We recommend the 508 for most applications as they are a more rugged Compressor than the 709. The 709 is perfect for smaller engines and uses less Horsepower than the 508.
How do I identify a Sanden compressor?
A: Look at the label on the compressor. The Sanden part number is listed under “Model Number” on the label. The part number is a 4 digit number.
Do Sanden AC compressors come with oil?
1. New Sanden compressors are shipped with all the oil required for a normal OEM system for which they were intended. In most cases no additional oil should be added. For R-134a A/C systems the original Sanden PAG oil shipped in the new Sanden compressor is the best lubricant for compressor durability.
How much oil do you put in a Sanden compressor?
11. The amount of oil in the compressor after running for 10-15 minutes should be as per the table below, if the proper amount of oil was in the system….TXV Systems. More than 56 oz. (1600g) Refrigerant Charge:
| Comp. RPM | Oil in Compressor | |
|---|---|---|
| fl.oz | cc | |
| 1,000 | 3.4 | 100 |
| 2,000 | 2.5 | 75 |
| 3,000 | 1.7 | 50 |
What is a Sanden style compressor?
The Sanden compressor is a compact cylindrical unit. about 8-1/2 inches long and about 5 inches in diameter. It is easy to spot with its barrel shape, aluminum color and small overall size. It has five or seven cylinders running lengthwise, thus the name axial compressor.
What compressor does vintage air use?
SD 709 compressor
The SD 709 compressor is recommended for any Vintage Air system. It pumps 9.5 cubic inches per revolution with a maximum 6000 sustained RPM range. Available in standard finish or polished as shown.
What is a Sanden compressor?
Where do I find my AC compressor number?
The part number is usually found on the side of the air con compressor pump but you may also have a part number on the clutch. Below we will show you where to find the part numbers. Some air con compressors will have a model number rather than a part number.
Where do I put the oil in my AC compressor?
Pour the oil very slowly into the intake port or low side of the compressor. This is where the large line entered. While pouring in the refrigerant oil, rotate the hub and clutch slowly to let the oil enter the compressor. If the compressor takes 6 oz.
Is Sanden a good compressor?
Above 1200 RPM, efficiency rapidly increases; at operating speeds of 1800 to 2400 RPM it is about the most efficient pump on the market. It can be operated at continuous crank speeds of 6000 RPM. These characteristics make the Sanden an almost ideal performance compressor.
What are the dimensions of a Sanden compressor?
SANDEN COMPRESSOR MODEL GROOVES GROOVE WIDTH VOLTS CLUTCH DIAMETER 9080, 5012, 9056, 9083, 9096, 9076, 9249 2 1/2″ 12V 125 mm 9077 2 1/2″ 24V 125 mm 9093 1 3/8″ 12V 125 mm 5017, 5027 PV 4 12V 135 mm
Which is better Sanden 508 or 709 airconditioning?
The advantage of the 508 is it provides ample capacity for the majority of performance vehicle applications but requires very little horsepower to operate. Sanden 505, 510 and 709 and 7176 series are also used in special applications depending on condenser size and space available.
Why do we need a Sanden air conditioner?
Sanden Compressors combine durability and versatility which enables them to service a wide range of mobile air-conditioning applications.
What’s the service guide for the SD compressor?
SD Compressor Service Guide. 1 Short term peak: 430 psig max. (short idle or short acceleration time) 2 Limited term: 400 psig max. (extended idle or short acceleration time) 3 Long term continuous: less than 300 psig. Up to 4000 rpm (for optimum life) 4 Max continuous temperature: 280 deg. F (300 F short term)
What is the difference between a Sanden 508 and 709? The 508 series Compressors are made at the Sanden facility in the Republic of Singapore and the 709 series Compressors are made in the USA. We recommend the 508 for most applications as they are a more rugged Compressor than the 709. The 709 is…