What is the size of bench vice?

Forged Steel Bench Vice APEX 741, Size: 5 & 8 inch

Type of Vice	Bench Vice
Size	5″ 4″ 6″ 8″ 10″ 12″
Usage/Application	Machining
Jaw Opening	4 Inch, 5 Inch, 6 Inch, 8 Inch
Base Type	Fixed

What is the specification of vice?

Help with Vises specifications:

Vise Features
Light-duty	The vise is designed only for light-duty clamping applications.
Pinch Point Safety Guards	The vise has integral safety guarding on pinch points for worker safety.
Rotating	Rotating vises are designed to rotate the jaws axially.

How do you measure a bench vice?

(This measurement is the length of the jaws from end to end and is maximum amount of contact your vise has with the workpiece.) The throat depth, measured from the top of the jaws to the top of the slide below it, is also something to consider. A longer throat depth means you can hold larger pieces more securely.

What material is a bench vice made from?

An engineer’s vise, also known as a metalworking vise, machinist’s vise, or, informally, a “bench vise”, is used to clamp metal instead of wood. It is used to hold metal when filing or cutting. It is sometimes made of cast steel or malleable cast iron, but most are made of cast iron.

What is universal vice?

: a vise (as on some milling machines) that can be swung either horizontally or vertically — compare swivel vise.

What is machine vice?

A machine vice is a device used to hold a workpiece while operating it on a drill press or milling machine. A drill press vice is used to clamp a workpiece during the drilling operation. It has multiple jaws that allow it to withstand a large amount of force that drill bit pierces the surface of the material.

What is a bench vice for?

To state in simple terms, a bench vise is a mechanical apparatus used to secure an object that is to be worked on. It features two parallel jaws as part of the design. The device is widely used in the mechanical and woodworking industries, among others.

What are the uses of bench vice?

Bench vices, also known as woodworking or engineer’s vices, are usually a tool made of metal or wood. Their sole purpose is to hold the object underneath, with grip and thereby work on the object. Simple examples of such works could be planning, drilling and sawing.

Where should a bench vise be placed?

Bench vises hold better when you push toward them, with the mass of the bench behind the workpiece. That’s why face vises usually are placed on the left end of the bench.

What size is a No 3 vice?

3 Mechanics Vice 100mm (4 in) – 4in Vice.

How does a bench vice work?

Woodworking Vises A set of jaws, one fixed and one moving parallel to the other, secures the workpiece with a screw mechanism, which moves one jaw in toward the other until they tightly fasten upon the workpiece. Jaws are typically made of wood, plastic, or metal, depending on the specific application.

What are the benefit of using Universal vice?

The most versatile of all machine vices with all degrees of freedom, the Universal Vice allows the work piece to be set at any desired angle. The specific advantage of this Vice is its ability to be set perpendicular to the base, thereby allowing right angle machining on the same machine setting.

How tall does a bench vise need to be?

In many cases people buy or build dedicated stands that bolt to the floor, or build a short bench just for the vise to put it at the right work height. In the pictures above, the 5″ vise is 10″ tall and the 6″ next to it would be 12″ if it was mounted on a swivel base.

What’s the difference between a bench and a Chain Vise?

Angle vises are also referred to as sine vises. Bench vises are typically mounted to a workbench. They are used for general clamping applications. Chain vises use a roller chain to clamp the work. They are used, typically, for clamping pipe or round stock. Chain vises are also called pipe chain vises.

How big is a cast iron bench vice?

Following are the specifications, in which these vices are available: 1 Size: 4″, 5″, 6″, 8″, 10″. 2 Precision cast body with coating finish 3 Base: Swivel base with anvil, swivel base without anvil, fixed base with anvil, fixed base without anvil 4 Polished or chrome plated handle 5 Packing: Box and carton

What are the different types of machine vises?

Machine vises and mill vises are used in milling and general machining applications. Pin vises are handheld vises with collet-style jaws. They are used for clamping small workpieces. Pipe vises or yoke vises are designed with V-shaped jaws to clamp pipe, tubing, and other round stock.

What is the size of bench vice? Forged Steel Bench Vice APEX 741, Size: 5 & 8 inch Type of Vice Bench Vice Size 5″ 4″ 6″ 8″ 10″ 12″ Usage/Application Machining Jaw Opening 4 Inch, 5 Inch, 6 Inch, 8 Inch Base Type Fixed What is the specification of vice? Help with Vises specifications:…