What is Uniden Extreme Upgrade?

The Extreme Upgrade allows the radio to not only perform all the regular scanner functions but also to analyze trunking systems in great detail, find new talkgroups and frequencies, perform direction finding analysis and much more. With Extreme Uniden has taken scanning to new heights.

What is the difference between Homepatrol 1 and 2?

Homepatrol 1 has a wide variety of charging options and it comes with the AC and DC adapters. It’s the best case for those who often have access to a power source. One other major difference is the included SD cards. The Homepatrol 2 comes with a 4GB option while the HP1 only comes with a 2GB.

What is the Home patrol Extreme Upgrade?

The Extreme Upgrade allows users to analyze trunked frequencies in more detail, direction analysis, configure new talkgroups and more advanced features.

How do I update my Homepatrol scanner?

Instructions for Updating the Firmware and Database on the Uniden HomePatrol-1

Connecting the scanner to the computer(USB Mass Storage will display)
Select the UPDATE tab on the Sentinel software toolbar and click UPDATE FIRMWARE.
Click OK on the next window that comes up.

What is the difference between p25 Phase 1 and Phase 2?

The biggest difference between Phase 1 and Phase 2 is that Phase 1 uses Frequency Division Multiple Access (FDMA), where the channel efficiency comes from dividing the frequencies. Phase 2 uses Time Division Multiple Access (TDMA) which divides the channel into two timeslots. Phase 1 bandwidth is 12.5kHz.

What is P25 Phase II?

(P25) Phase 2 refers to P25 requirements and standards for a digital Common Air Interface (CAI), Time Division Multiple Access (TDMA) based, which provides one voice channel per 6.25 kHz channel spectrum efficiency. At this time, Phase 2 is all about traffic channels on trunking systems.

How do I reset my Uniden radar?

To do this, press the “Menu” button, scroll left with the “Vol -” button until you see “Factory Reset?” and then hit the “Menu” button again to reset the detector back to factory default settings.

How do I update my Uniden radar?

How to update the firmware on Uniden R1 and R3 radar detectors

Turn the detector off and connect to a PC using a USB cable via the micro USB port located on the side of the detector.
Unzip the downloaded file to a new folder on your PC.
Locate and run the file called “Uniden R Series SW Download Tool [version number].

Which is the best software for Uniden homepatrol?

ARC PATROL is the best selling softwareavailable for the HomePatrol HP-1/HP-2! The Uniden Homepatrol HP1/HP2 comes with software but the included software has some limitations and the favorites editor to create new systems in Sentinel is very limited.

Can a hp1e be used on a Uniden DMA scanner?

If you are familiar with the Uniden DMA scanners, such as the BCD996XT or BCT15X, then you will know what “Systems”, “Sites”, “Groups” and “Channels” are. The HP1E allows you to create new Systems in much the same fashion, but effectively “Departments” on the HP1E equals “Groups” on DMA scanners.

Which is the first update for the HP1?

The first paid update for the HP1 is called the HomePatrol 1 v2 Extreme Edition, or more simply just the HP1 Extreme or HP1E. It is intended more for the advanced scanner user than the novice.

Which is the Best Editor for Uniden Sentinel?

ARC-PATROL includes the most versatile and most feature rich editor available on the market. ARC-PATROL combines the best of 2 worlds! With ARC-PATROL you can directly access (*) the RadioReference.com Database and import trunk and conventional systems directly into your HP-1!

What is Uniden Extreme Upgrade? The Extreme Upgrade allows the radio to not only perform all the regular scanner functions but also to analyze trunking systems in great detail, find new talkgroups and frequencies, perform direction finding analysis and much more. With Extreme Uniden has taken scanning to new heights. What is the difference between…