What should the fuel pressure be for a Edelbrock carb?

What should the fuel pressure be for a Edelbrock carb?

Carburetor Fuel Pressure by Manufacturer

Carburetor Style Recommended Fuel Pressure
Autolite 4.5 – 6.5 psi
Holley 5.5 – 7.5 psi
Edelbrock 6.5 psi (max)
Demon 5 – 6 psi (at idle)

How do I know what size carb to buy?

Carburetor Sizing Carbs are sized by cubic feet per minute (cfm). Larger engines that operate at higher rpm need more air and fuel. It is important to match the carburetor’s cfm rating to the needs of your engine. Follow this link to learn more about Carburetor CFM Rating.

What do you need to know about Edelbrock engine swaps?

They must be used on the specific year, make and model for which it is listed. ENGINE SWAPS: All products with this icon are intended to be used with engines that have been transplanted or swapped into an uncontrolled or pre-pollution controlled vehicle, as defined above. They are not legal for use on pollution controlled vehicles.

Can you use Edelbrock on a PPCV vehicle?

FOR USE ON PRE-POLLUTION CONTROLLED VEHICLES (PPCV): All products with this icon are legal for use on pre-pollution controlled vehicles. They can be used on all vehicles that were manufactured before emissions control regulations were imposed. These vehicles are considered “uncontrolled vehicles.” UNCONTROLLED VEHICLES ARE DEFINED AS…

Is it legal to use Edelbrock on a street car?

They are not legal for use on vehicles that are registered for street use. FOR USE ON PRE-POLLUTION CONTROLLED VEHICLES (PPCV): All products with this icon are legal for use on pre-pollution controlled vehicles. They can be used on all vehicles that were manufactured before emissions control regulations were imposed.

Where can I Find my Edelbrock Executive Order Number?

Also, you may use the chart below to find your E.O PDF, by simply clicking on the RED E.O Numbers! 50-STATE LEGAL: All products with this icon currently have a California Air Resources Board (C.A.R.B.) Executive Order (E.O.) number.

What should the fuel pressure be for a Edelbrock carb? Carburetor Fuel Pressure by Manufacturer Carburetor Style Recommended Fuel Pressure Autolite 4.5 – 6.5 psi Holley 5.5 – 7.5 psi Edelbrock 6.5 psi (max) Demon 5 – 6 psi (at idle) How do I know what size carb to buy? Carburetor Sizing Carbs are sized…