What type of material is Nitronic 50?

50 stainless steel
Nitronic™ 50 stainless steel is an austenitic grade providing corrosion resistance greater than other typical austenitic grades such as SS 316/316L and 317/317L. It is also capable of nearly double the yield strength of similar austenitic grades.

What is nitronic material?

Nitronic 50 is an austenitic premium stainless steel that provides better corrosion resistance than 300 or 400 series stainless. The combination of strength, superior corrosion resistance, and low magnetic permability makes this alloy a top choice for high-risk applications such as medical implantations.

What is the difference between Nitronic 50 and 60?

Nitronic 50 is a corrosion-resistant metal with low magnetic permeability. Generally considered an all-purpose metal, nitronic 60 is oxidation resistant and tolerates extreme wear and galling.

What type of material is Nitronic 60?

Nitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800ºF. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to Type 304S.

What is xm19?

NAS XM-19 is a nitrogen-strengthened austenitic stainless steel with excellent corrosion resistance. In comparison with Type 316L, NAS XM-19 provides higher corrosion resistance and higher strength. Nippon Yakin supplies this product in plate, sheet and strip forms.

What is inconel718?

INCONEL® alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium material used at -423° to 1300°F. The age-hardenable alloy can be readily fabricated, even into complex parts. Its welding characteristics, especially its resistance to postweld cracking, are outstanding.

Is Nitronic 60 expensive?

With that in mind, it is important to design parts to fit as close as possible to existing stock sizes since Nitronic 60 is both an expensive material and generally more expensive to machine.

Is Nitronic 60 hard to machine?

Nitronic 60 has a relatively low hardness compared to other nickel alloys, but has a much higher heat resistance due to a thin, adherent oxide film. Nitronic 60 has a machining cost factor of 9.0 when compared to steel 12L14. It can be readily welded.

Is nitronic magnetic?

Nitronic® 60 is characterized by low magnetic permeability even after severe cold working and at cryogenic temperatures.

Is Nitronic 60 weldable?

Nitronic 60 is a P8 according to ASME IX, so any P8 should provide a mechanically sound weld. We weld small bores up on some parts using 316L plugs and 316L filler and have no problems with the welds.

What type of stainless steel is 17 4 PH?

precipitation hardening martensitic stainless steel
17-4 PH Stainless Steel is a precipitation hardening martensitic stainless steel. Typical usage is seen in applications requiring high strength and a modest level of corrosion resistance. Strength and toughness desired can be manipulated by temperate range in the heat treatment process.

What are the grades of Nitronic xm-19?

Cr 22, Ni 12.5, Mn 5, Mo 2.25, Si 1 C 0.06 Fe bal. High Performance Alloys stocks and produces this grade in the following forms: Bar, hex bar, wire spool. wire cuts, loose coil, wire reel, sheet, plate, pipe, fastener, disk, forged, slab, billet, ingot. Request quote on this grade.

What kind of stainless steel is Nitronic 50?

Nitronic 50 is austenitic non-magnetic stainless steel with the addition of nitrogen, manganese and molybdenum, characterised by high mechanical properties (f.ex. resistance characteristics) and a very good corrosion resistance.

What makes xm-19 stainless steel a good alloy?

Additionally, it has good mechanical properties at elevated and sub-zero temperatures. Other characteristics that set XM-19 apart from other grades of stainless steel are that it does not become magnetic when severely cold worked and it has outstanding corrosion resistance in harsh environments such as marine applications.

How is xm-19 converted to high strength?

On the other hand, transforming XM-19 into the high strength condition can only be done at the mill after the original rolling process, which is done at a lower temperature than annealed and as-rolled material to further help increase the properties.

What type of material is Nitronic 50? 50 stainless steel Nitronic™ 50 stainless steel is an austenitic grade providing corrosion resistance greater than other typical austenitic grades such as SS 316/316L and 317/317L. It is also capable of nearly double the yield strength of similar austenitic grades. What is nitronic material? Nitronic 50 is an…