Why is my VTM-4 light on in my 2003 Honda Pilot?

The VTM-4 light is on because your all-wheel-drive is automaticlly disabled to prevent more damage to associated systems. 3rd and 4th clutch pressure switches were common problems on those (not warranty). Dealer would be quickest cause they most likely would have either switch in stock IF that’s what it is.

What does VTM lock mean?

The VTM-4 Lock® feature allows you to manually lock the rear differential in place to get you moving when faced with extreme conditions. By simply pushing the Lock button, you can fully engage four-wheel drive to gain momentum, putting all of your power to the rear axle.

What does the VTM-4 light mean on a Honda Pilot?

When this indicator is on, one or more of your tires is significantly under inflated. You should stop and check your tires as soon as possible. The VTM-4 Lock will temporarily disengage when the vehicle speed exceeds 18 mph (30 km/h).

How do I turn off VTM-4 Honda?

The first way is simply press the VTM4 button that is located on the dash next to the radio. The second way is to shift the drive selector lever to park and then back to drive while You are stopped. The third way is to turn off the vehicle and then turn it back on.

What causes VTM-4 light to come on?

This is the Variable Torque Management 4 wheel drive system. It is the component of Your vehicle that moves the amounts or levels or torque to the rear wheels of the vehicle when additional traction is needed. The most common cause of this light showing up is due to low oil in the engine, or a loosened or blown gasket.

Why is my VTM-4 light on in my Ridgeline?

When your Honda Ridgeline is in traction control mode, then the VTM-4 lights up. The wrench shaped light is the Maintenance Minder Indicator, and it means it’s time to have your Honda Ridgeline serviced per its maintenance schedule.

What is Honda VTM-4 lock?

Page 1. The Variable Torque Management 4WD System (VTM-4) automatically transfers varying amounts of engine torque to the rear wheels under lower traction conditions. If more traction is needed when your MDX is stuck, or is likely to become stuck, you can use the VTM-4 Lock button to increase torque to the rear wheels.

How does the Honda Pilot 4WD system work?

Pilots with Honda’s Variable Torque Management 4WD system (VTM-4) sent most power to the front wheels under normal driving conditions. Under acceleration or if wheel slippage is detected at the front wheels, up to 50% of power can be sent to the rear wheels.

What does code VTM-4 mean?

Variable Torque Management 4WD System
The Variable Torque Management 4WD System (VTM-4) automatically transfers varying amounts of engine torque to the rear wheels under lower traction conditions. If more traction is needed when your MDX is stuck, or is likely to become stuck, you can use the VTM-4 Lock button to increase torque to the rear wheels.

What does check engine light mean on Honda Pilot?

If the check engine light in your Honda Pilot starts twinkling, that means that the problem needs quick attention and your Honda should be transported in suddenly. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. …

What does it mean when your engine light comes on?

The check engine light — more formally known as the malfunction indicator lamp — is a signal from the car’s engine computer that something is wrong. If the light begins flashing, however, it indicates a more serious problem, such as a misfire that can quickly overheat the catalytic converter.

Why is my VTM-4 light on in my 2003 Honda Pilot? The VTM-4 light is on because your all-wheel-drive is automaticlly disabled to prevent more damage to associated systems. 3rd and 4th clutch pressure switches were common problems on those (not warranty). Dealer would be quickest cause they most likely would have either switch in…