Will a 6 pin work on a 8 pin GPU?

Product Description. The Cable Matters 6-Pin PCI to 8-pin Adapter Power Cable provides a convenient solution for powering a video graphics card from a PSU with only a 6-PIn PCIe power connection. Power a new video graphics card with an existing 6-pin PCIe power connection on your PSU.

Can you use a 6 pin on a 8 pin GPU Reddit?

most 8-pin GPU will actually work with only 6 pins.

What GPU uses 6 pin?

1. EVGA GeForce RTX 2070. The EVGA GeForce is the best graphics card with 6 pin connector since I have found no flaws in it.

Can I use 8 pin CPU on GPU?

So in theory the card should be absolutely fine. For reference, if the card has just an 8-pin connector, then if you powered it with an EPS12V, it would have been exposed to -12V which would have almost certainly have caused it to fry – and would probably also have taken the motherboard out along with it!

Can I use a 4-pin power supply on a 8 pin motherboard?

If your power supply only has a 4-pin connector, it’s still quite likely that you can use it in an 8 pin port. If compatible then it will go in on “one side” of the 8-pin connector. This will likely give enough power, but beware over-clocking.

What are 8 pin connectors for?

8-pin power connectors are found in high-end graphics cards. 8-pin connectors have 4.2mm pitch and can deliver up to 150 watts, twice the amount that a 6-pin connector is capable of.

How many watts is a Molex?

54 watts
The ATX standard for SATA or Molex connections is rated for 54 watts. Each SATA/Molex connector provides three 12v pins at 1.5 amps each, for a total of 4.5 amps. 12 volts, times 4.5 amps, equals 54 watts able to be provided by a SATA/Molex connector. Some PCIe risers do not conform to ATX specifications.

Can a 6 pin GPU work with an 8 pin power?

Turns out 6->8 pin conversion is not that hard to do. Looking at a pinout of both connectors, it occurred to me that a modification should be quite simple. Grounding the “Sense B” pin tells the GPU that an 8 pin had been plugged in. So my thinking was that I could plug in the 6 pin, and then just bridge the remaining two pins.

What kind of power adapter do I need for 8 pin graphics card?

SATA to 8-Pin PCI-E Adapter Cable – If your graphics card has an 8-pin connector but your power supply has neither 6-pin or 8-pin connectors then you can use this SATA to 8-Pin converter cable to power your graphics card. This power adapter cable uses two SATA connectors for one 8-pin power connector.

What’s the difference between 6 pin and 8 pin PCI-E?

The difference is that the 8-pin requires the third 12V wire. The 6-pin PCI-E power connector specification includes two 12V wires and three ground wires and has a rated maximum power output of 75W. The 8-pin includes three 12V wires and 5 ground wires and has a rated power output of 150W. source

Which is better a 6 pin or 8 pin power adapter?

8-pin has the same number of power pins, but it has two more ground pins than a 6-pin PCIe power connector. The adapter works because the extra two pins can be grounded, but your current carrying capacity is reduced in comparison. If a connection is loose, you could start a fire under heavy load.

Will a 6 pin work on a 8 pin GPU? Product Description. The Cable Matters 6-Pin PCI to 8-pin Adapter Power Cable provides a convenient solution for powering a video graphics card from a PSU with only a 6-PIn PCIe power connection. Power a new video graphics card with an existing 6-pin PCIe power connection…