Are yor Lok and Swagelok compatibility?
Are yor Lok and Swagelok compatibility?
They are used in high-precision applications. They can be used with the Let-Lok and A-Lok fittings.
Who makes yor Lok?
Hy-Lok USA, Inc.
double ferrule compression tube fittings provide leak-free performance for the most demanding applications. Two ferrule tube fittings are designed and manufactured to meet the rigorous specifications required of industrial applications.
What is yor Lok fitting?
Quick Disconnect fittings consist of a socket and a plug, sometimes called a coupling and an insert. They easily connect and disconnect with the push of a latch. These compression fittings are made to handle higher pressures and are sometimes known as Yor-Lok fittings.
How much does it cost to tighten Swagelok fittings?
While holding fitting body steady, tighten the plug one- quarter turn from the finger-tight position. For 1/16, 1/8/ and 3/16 inch, tighten the plug one- eighth turn. For over 1 inch tighten the plug one-quarter turn. You may disassemble and reassemble Swagelok plugs many times.
Can you reuse Swagelok fittings?
One of the many advantages of the Swagelok two-ferrule fitting design is the ability to re-use the body without leaks. If you have made changes in the system design, by moving a fitting to a new location or changing the tubing, you can’t re-use the nuts and ferrules, but you can still re-use the fitting bodies.
What is a Parker nut?
Parker-Hannifin stainless steel nuts are used to connect 1/16 in O.D. stainless steel tubing and feature a 10 – 32 thread size.
What happens if you over tighten Swagelok?
If a valve is over-tightened, it deforms the tubing and the connection. These deformities create cracks and gaps where the fluid can begin leaking out.
How tight should Swagelok fittings be?
While holding fitting body steady, tighten the plug one-quarter turn from the finger-tight position . For 1/16, 1/8, and 3/16 in.; 2, 3, and 4 mm tube fittings, tighten the plug one-eighth turn. For over 1 in. and over 25 mm tube fittings, tighten the plug one-quarter turn.
Are Parker and Swagelok fittings interchangeable?
Is Parker CPI™ Really Interchangeable? Yes. All threads, the seal seat angles and position, tube insertion depth, hex sizes and width, etc., are the same as Swagelok®. The only basic difference between the two fittings is the fact that Swagelok® uses two ferrules while we use one.
What kind of fittings are compatible with Swagelok?
Yor-Lok Fittings forStainless Steel Tubing. Use these fittings at pressures up to 9, 700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let- Lok, and Parker A-Lok fittings.
How to browse products on swagelok.com?
Better Browsing Experience. It is easier than ever to research and purchase products on swagelok.com. Explore the new browsing and buying process for yourself. Achieving Peak Uptime Starts at the Gas Bottle.
How to install a Swagelok multihead hydraulic swaging unit?
Preswage the ferrules onto the tube using a Swagelok multihead hydraulic swaging unit (MHSU) . 2 . Apply the lubricant packaged with the fitting lightly to the body threads and the rear surface of the back ferrule . 3 . Insert the tube with preswaged ferrules into the fitting until the front ferrule seats against the
What kind of fittings are used for Yor Lok?
Polished to a 15 Ra and under finish, these fittings have a mirror smooth interior. They are also known as ultra-high-purity fittings. Also known as feedthroughs, these fittings transfer liquids, cryogenic liquids, or gasses into high-vacuum chambers for coating, cooling, and leak-testing applications without losing vacuum pressure.
Are yor Lok and Swagelok compatibility? They are used in high-precision applications. They can be used with the Let-Lok and A-Lok fittings. Who makes yor Lok? Hy-Lok USA, Inc. double ferrule compression tube fittings provide leak-free performance for the most demanding applications. Two ferrule tube fittings are designed and manufactured to meet the rigorous specifications…