How do I access my Technicolor TG582n?

Technicolor TG582n Login Guide

Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
Type 192.168.1.254 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface.

How do I change my Technicolor TG582n IP address?

Click on ‘Home Network’. This page shows you the overview of the current settings, click ‘configure’ to edit them. You will now need to add a new IP address for the router to use.

How do I access my kcom router settings?

Logging into the Zyxel setup

Once you’re connected to the router with your device, you need to open the Internet browser.
Type 192.168.1.1 into your address bar and press enter or go.
You should now see a blue page for your Zyxel router asking you to log in.

How do I access E31T2V1?

Logging into the E31T2V1 modem page. Go to Google and then type default gateway which is “192.168. 0.1”. Put in the default credentials for the modem (Username stays blank, password is “admin”).

How do I change the password on my Technicolor router?

To change the WiFi password on your Technicolor modem, just access your modem interface page ( Link ) via a computer that is already connected via WiFi or Ethernet. Once you have the page open, select Home Network on the left navigation panel. There should be an option down the bottom to configure the main WLAN.

What routers work with kcom?

The incumbent broadband ISP for Hull in East Yorkshire, KCOM, has confirmed to ISPreview.co.uk that they will launch two new routers from mid-September 2019 – the Technicolor DGA2231 and ZyXEL XMG3927-B. Both look to be very capable devices and are aimed at users of their Fibre-to-the-Premises (FTTP) network.

How do I change the channel on my kcom router?

Now you’re logged into the router, select Network Settings at the bottom of the page and then select Wireless. First, look for the setting labelled Band. Change this to the network that you want to change – either 2.4GHz or 5GHz. Now look for the setting labelled Channel.

What kind of router does Technicolor tg582n come with?

The Technicolor TG582n is a high performant router: with a simultaneous operation of 802.11b/g and 802.11n (2×2), speed and performance are guaranteed. Featuring an integrated 10/100Mbps 4-port switch, the Technicolor TG582n offers seamless connection of wired and wireless devices from anywhere in the home.

How to fix an IP address on a tg582n?

Having looked at Telnet and other solutions, I have finally found how to get fixed IP addresses within the TG582n’s own GUI. First, you let DHCP allocate an IP address then you can find an option to fix the IP address on the device. This sets the DHCP lease time to ‘Infinite’.

What’s the default password for my Technicolor router?

The default password is either blank or the ACCESS KEY printed on the label of your Technicolor Gateway. This depends on the settings chosen by your Service Provider. Mostly there is no need to change the Login username and password. Just click on the Login. Unless you yourself did input a username and password when you do your 1st setup setting.

What’s the difference between tg582n and dant-1?

The TG582n comes in at least three distinct hardware variants distinguished by their board name (DANT-1, DANT-T, DANT-V). The only hardware difference seems to be flash chip, which is either 8 MiB or 16 MiB depending on whether the device supports “dual bank” setup or not.

How do I access my Technicolor TG582n? Technicolor TG582n Login Guide Open your web browser (e.g. Chrome, Firefox, Opera or any other browser) Type 192.168.1.254 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. How do I change my Technicolor TG582n…