How do I connect my Klipsch soundbar to my TV?

How do I connect my Klipsch soundbar to my TV?

This product is built and designed to be connected directly with your TV/devices without any AVR needed.

1. Plug an HDMI cable into the HDMI input on the sound bar.
2. Plug the opposite end into the HDMI-ARC port on the TV.
3. Plug an HDMI cable into the HDMI input on the TV.

How do I connect my Klipsch soundbar to my TV with HDMI?

once you have placed the Klipsch HD Theater SB 3 soundbar where you want it either below or above your TV, connect one end of an optical digital cable (supplied) to your TV’s optical digital audio output jack and connect the other end of the cable into the optical input jack on the rear of the soundbar.

How do I reset my Klipsch R 10B?

R-10B – Factory Reset

1. Turn the sound bar off by unplugging the power cable.
2. Unplug all audio cables from the sound bar.
3. Plug only the power source back in and turn the bar on.
4. With the LED solid RED, press and hold the [Mute] and [Volume Down] buttons at the same time until the light flashes red several times.

How do I connect my Klipsch soundbar to my LG TV?

The first step is to turn on both your TV and your soundbar. Then, connect one end of the HDMI cable to the HDMI OUT port on the soundbar. Finally, plug the other end to the HDMI IN (ARC) port on your LG TV. With HDMI ARC, you can also connect other components such as Blu-ray players and PS4 to the soundbar.

How do I connect my Klipsch Cinema 400 to my TV?

Cinema 400 – Connecting via HDMI-ARC

1. Plug an HDMI cable into the HDMI input on the sound bar.
2. Plug the opposite end into the HDMI-ARC port on the TV.
3. Plug an HDMI cable into the HDMI input on the TV.
4. Plug the opposite end into the gaming system, DVD/Blu-Ray, computer, etc.
5. Plug the power cord into the sound bar.

How do I reset my Klipsch soundbar?

PowerBar-Factory Reset

1. Turn the Power Bar off.
2. Unplug all audio cables from the Sound Bar.
3. Turn bar back on.
4. With the LED is solid RED, press and hold the [Mute] and [Volume Down] buttons at the same time until the light flashes red several times.
5. The soundbar is now reset back to factory defaults.
6. Turn the Bar back off.

How do I reset my Klipsch remote?

Bar 48 – Factory Reset

1. Press and hold the Power and Source Select buttons simultaneously for a full 10 seconds.
2. Once complete, you will see the source LED light on the front of the bar turn Orange with three white LED’s on top of it.

How do I control my Klipsch Soundbar with my TV remote?

RSB Series – TV Remote Programming

1. Press and hold the “Mute” button on the front of the sound bar for 3 seconds.
2. The source that the bar is currently on will start flashing, indicating it is in remote programming mode.
3. On the front of the sound bar, press the button you wish to program once.

How do I connect my Klipsch subwoofer to my TV?

Using a subwoofer cable (RCA cable), connect the subwoofer to the AV receiver by running the cable from the receiver’s subwoofer output to the subwoofer’s line input. Klipsch subwoofers can be connected via the LFE channel, the white RCA connection, or in a stereo pair by using both the white and red RCA connections.

How do you program a Klipsch remote?

How do I connect my Klipsch soundbar to my TV? This product is built and designed to be connected directly with your TV/devices without any AVR needed. Plug an HDMI cable into the HDMI input on the sound bar. Plug the opposite end into the HDMI-ARC port on the TV. Plug an HDMI cable into…