How do I reset SCS 2u01?

The factory reset button is in a small hole located on the connection side of the network extender. Insert one end of an unfolded paperclip into the factory reset hole then press the paperclip on the button and hold for at least 30 seconds. The device must be connected to power for the reset to complete.

Why is network extender not working?

This kind of issue can occur if the extender does not have the latest firmware. Process: Make sure the extender is connected to the power adapter provided and into a live power outlet. Make sure the extender is within the Wi-Fi range of the wireless router and client device is connected to the extenders network.

How do I reset my Verizon extender?

Press and hold the reset button for at least 10 seconds, until the Power LED displays solid white, indicating a reset. Wait a few minutes for the device to restart. The factory reset button is located on the back of the Network Extender next to the AC adapter port.

Why does my Verizon extender keep blinking?

The lights on the router and extender should turn blinking blue while the wireless connection is initiating. Once the firmware update is complete and the extender starts fast blinking yellow, you can now unplug and move the extender to an area between the router and an area with spotty Wi-Fi coverage.

Why is my Verizon router blinking blue?

The FiOS router blinks blue when it’s trying to connect to another device. If it continues to blink and doesn’t glow a solid blue, the connection has failed due to weak signal strength.

How do you perform a signal refresh?

Android: Hold in the power button, or power button and volume down key depending on your Android phone, until the onscreen menu shows up and then select restart. If your phone doesn’t offer a restart option, hold in the power button until the screen goes black and then turns back on.

How do I restart my network extender?

Locate your extender’s Reset or Factory Reset button. The button is usually located on the extender’s side or bottom panel behind a small hole. Use a straightened paper clip or similarly sized object to press and hold the Reset or Factory Reset button until the Power LED blinks. This can take up to 10 seconds.

When to auto reboot Samsung scs-2u01 user manual?

Page 22 If the Network Extender for Business is configured to use DHCP and does not receive a response from the DHCP server after several retries, the device will assign itself the default IP address and then try to auto-reboot every 10 minutes. This 10 minute period allows a network administrator time to configure the device.

How to set up Samsung scs-2u01 network extender for business?

Insert one end of the power cord into the power supply and then plug the other end into an available power outlet (4). Confirm that the front LEDs are illuminated as indicated below: Note: Allow 3 – 5 minutes for the Network Extender for Business to complete the startup sequence and detect both its connections and available communications.

How big does a Samsung SCS 2u01 need to be?

IP Address FQDN 209.210.15.73… In a typical cubicle office environment, the units need to be placed 85 feet apart. • In a typical open warehouse, the units need to be placed 120 feet apart. • In a heavily obstructed environment, the units need to be placed 60 feet apart.

What does Blue fast mean on Samsung SCS 2u01?

Fast Indicates traffic activity Blinking (voice or data) on the NE. BLUE Solid Internal power failure NE is in POST progress GPSR Magenta Communication failure alarm issued Solid 1x is In-service but DO Green is in error Slow Software download in Blinking progress. Page 25 Solid Fast Solid System • Reason: • Check AAA provisioning.

How do I reset SCS 2u01? The factory reset button is in a small hole located on the connection side of the network extender. Insert one end of an unfolded paperclip into the factory reset hole then press the paperclip on the button and hold for at least 30 seconds. The device must be connected…