How do I scan with Brother DCP-L2540DW?

How do I scan with Brother DCP-L2540DW?

In Home Mode: Click Device Settings tab > Device Scan Settings. In Advanced Mode: Click Device Settings tab > Device Scan Settings….For Windows

1. Open Brother Utilities. Windows 7 / 10. Click or. (Start) > (All Programs or All apps >) Brother > Brother Utilities.
2. Select Scan.
3. Click ControlCenter4.

How do I scan on a Brother DCP printer?

Place the document to be scanned on the scanner glass (Flatbed) or Automatic Document Feeder (ADF), depending on the model of your Brother machine. Press the Scan key on the Brother machine and select Scan to PC -> File, or Scan to File.

How do I test my brother DCP-L2540DW?

How do I print a Test page?

1. Turn off the printer.
2. Make sure that the front cover is closed and the power cord is plugged in.
3. Hold down Go as you turn on the power switch. Keep Go pressed down until the Back Cover, Toner, Drum and Paper LEDs light up. Release Go.
4. Press Go again. The printer will print a test page.

How do I setup my brother DCP-L2540DW printer?

Brother DCP-L2540DW Wireless Setup

1. Turn your router ON and it must be having an active internet connection.
2. Connect your PC to the router’s network.
3. On the function panel of the Brother DCP-L2540DW setup printer, tap the Menu button.
4. Utilize the arrow buttons and pick the Network option.
5. Select Setup Wizard –> OK.

How do I use my brother DCP L2550DW scanner?

DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW

1. Load your document.
2. Press (SCAN).
3. Press or to select the [Scan to PC] option, and then press OK.
4. Press or to select the [E-mail] option, and then press OK.

How do I connect my Brother printer to Ethernet?

1 Connect via Ethernet

1. In order to connect to a wired Ethernet connection, your printer needs to have an Ethernet port on the rear.
2. Acquire an Ethernet cable and connect it to the port on the back of the printer.
3. Take the other end of the Ethernet cable and plug it into your router’s Ethernet port.

How do I setup my brother DCP?

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an electrical socket.
2. Press Menu button on the machine’s control panel.
3. Press the Up or Down arrow key to select Network and press OK.
4. Press the Up or Down arrow key to select WLAN and press OK.

How do I setup my Brother DCP L2550DW?

Press the Menu key. Use the down arrow button on the printer’s control panel and select “Network” and press OK. Use the down arrow button on the printer’s control panel to select “WLAN” and press OK. Use the down arrow button on the printer’s control panel to select “Setup Wizard” and press OK.

How do you install a Brother scanner?

To begin installing your Brother MFC device, connect its power cable to an electrical outlet and then connect its USB cable to your computer. Turn on the MFC device and wait for the computer to detect it. Once your computer recognizes the device, it will automatically begin installing any necessary drivers.

How do you download a brother driver?

Go to the Brother website and type in your model number and click search. Select downloads and then select the Operating System you are using. Find the correct Driver and download the file. Then double-click on the file once downloaded and proceed to install the updated Driver.

How do you set up a brother printer?

How to Setup Brother Wireless Printer-. When You Buy A Brother Printer It Comes With A USB Cable. Connect The Computer With Printer With USB Cable and Open The Internet Browser. Now Download The Printer Setup From Official Brother Website Visit And Enter Your Model Number And Select Your Product Listing ( Printers (HL Series ).

How do you download brother utilities?

The Way to Download Brother Utilities Get into the Brother Product Service Center. Select machine and put in your location/country. Locate your merchandise including type, version, and show. At any time you find the product, click Downloads on Full Driver & Software Package. Under Downloads dialog, select your OS. Click Search.

How do I scan with Brother DCP-L2540DW? In Home Mode: Click Device Settings tab > Device Scan Settings. In Advanced Mode: Click Device Settings tab > Device Scan Settings….For Windows Open Brother Utilities. Windows 7 / 10. Click or. (Start) > (All Programs or All apps >) Brother > Brother Utilities. Select Scan. Click ControlCenter4.…