How do I setup a WAN network?

Setting up WAN connections

Make sure the “Active” item on the Network menu is checked.
Open the Shared Projects dialog from the Network menu.
Click the “Add WAN Connection” button on the toolbar.
Type in the IP address/Domain Name of the computer you want to connect to and click OK.

How do I set up DrayTek vigor router?

DrayTek Vigor 2860 VDSL setup

Browse to [WAN] > [General Setup], click [WAN1] and Set the DSL mode to VDSL and the VDSL VLAN tag to 101.
Set the WAN mode to PPPoE and click “Details Page”
Enable PPPoE and input the username and password, as required.
The online status menu will display the VDSL and PPP information.

Does DrayTek 2830 support VDSL?

The Vigor 2830’s secondary WAN interface can be connected to other modems now or later (e.g. a second ADSL, a VDSL/BT Infinity or cable modem etc.). Packed with features, the Vigor 2830 offers truly comprehensive ADSL connectivity and security.

How do I set up DrayTek access point?

Initial Setup

Connect the VigorAP’s LAN port (LAN-A) to the router’s LAN network via a wired connection.
On VigorAP, go to Central AP Management >> General Setup and make sure Vigor AP Management and Auto Provision are enabled. (
On the router, go to Central Management >> AP >> Statusif the VigorAP is detected.

Does VDSL2 use PPPoE?

The VDSL2 modem acts as an ethernet bridge. On the DSL side, it operates in PTM mode and not ATM mode, hence PPPoE rather than PPPoA. The modem encapsulates the ethernet frames from the IP router with a control header for transmission over the twisted pair to the DSLAM in the cabinet.

Does Plusnet use PPPoE?

The settings you need to connect to Plusnet broadband using your own router….What settings should I use for fibre broadband?

It asks for:	Use:
Connection type or encapsulation	PPPoE Always On
Password	The password you use to log in to the Member Centre
VLAN	Active
VLAN ID (802.1q)	101

How do I separate guest WiFi from LAN?

How to Isolate WiFi Guests from the LAN?

Create the SSID2 for Guests and select the Isolate LAN option.
Configure the WLAN Security Settings for SSID2.
Go to Objects Setting >> Device Object.
Select the Gateway Router’s MAC then click OK.
The Gateway Router’s MAC has been created as a Device Object.

How to set up Draytek Vigor WAN router?

Step 1 – Connect Ethernet cable and access router configuration. Connect the WAN port of the DrayTek Vigor router to your Ethernet Internet source with an RJ-45 Ethernet cable (either a “patch” or “cross-over” lead, the port is auto-sensing of which type of cable is used). Access the DrayTek Vigor router’s web interface, more information.

What does Draytek Vigor 2830 object based firewall do?

The latest (‘Version 3’) DrayTek object-based firewall allows even more setup flexibility than ever, enabling you to create combinations of users, rules and restrictions to suit multi-departmental organisations. The Vigor 2830 now also allows selective direction firewall rules of LAN to WAN, WAN to LAN or LAN to VPN.

Which is the Wan ip address for Vigor?

Any other IP Address would use 172.17.1.53. Vigor 2830/2850/2920/3200 series: Main WAN IP address is 172.17.1.53 To inform the router that additional IP Addresses can used for the WAN connection, the other IP addresses from IP block should be entered in the WAN IP Alias tab. Make sure Join NAT IP Poolis not checked.

Can a vigor 2830 be used as a cable modem?

Compatible with all variants of ADSL (including ADSL2+ and Annex M) the Vigor 2830 can also be used for cable-modem and leased line applications using its additional gigabit ethernet WAN port. A four port Gigabit switch on the LAN side provides high speed connectivity for your server or other local PCs, for the highest speed local data transfer.

How do I setup a WAN network? Setting up WAN connections Make sure the “Active” item on the Network menu is checked. Open the Shared Projects dialog from the Network menu. Click the “Add WAN Connection” button on the toolbar. Type in the IP address/Domain Name of the computer you want to connect to and…