How do you adjust stance on coilovers?

To adjust the coilovers, first, unlock collar B by taking your adjustment wrench and turn it clock-wise. Once loose, spin collar B by hand down the length of the coilover. You will then use the adjustment wrench to turn collar A clockwise to lower and counter-clockwise to raise the car.

Do I need an alignment every time I adjust my coilovers?

Do You Need Alignments After Installing Coilovers? Absolutely yes. The ride height that comes from the factory coilovers are usually way too low. When you adjust the ride height using coilovers, your camber will also be impacted.

Does adjusting coilovers affect ride quality?

Does this mean they won’t give you a performance increase? Absolutely not. Since most coilovers are also going to allow you to lower the ride height, the spring and shock rate should be increased to avoid the suspension crashing and bottoming out. Doing so will offer a performance bump to most any vehicle.

How do I make my coilovers smooth?

For a smooth ride, you need to soften both the compression and rebound on your coilovers. Fortunately, this should not be that difficult. Coilovers that provide these adjustability will also include a knob that you can just turn for adjustment. Note that not all coilovers come with adjustable compression and rebound.

Will adjusting ride height mess up alignment?

The answer is yes. The alignment will change a lot when you adjust ride height.

Does lowering coilovers affect alignment?

Damping changes won’t affect alignment.

Does lowering your car affect ride quality?

A lowered car may put extra stress on various other suspension and steering system parts, leading to excessive wear and even premature failure. Tires may rub against sheet metal or suspension parts, causing damage to both. The ride will almost always be harsher, as most lowering methods reduce spring travel.

What’s the best way to adjust a coilover?

You will then use the adjustment wrench to turn collar A clockwise to lower and counter-clockwise to raise the car. Once you have the perches adjusted to where you want it, spin collar B back up against collar A and use both provided adjustment wrenches to lock the collars against each other.

What makes stance + coilovers such a good brand?

Stance+ is a brand run by enthusiasts and driven by an unrivalled passion and attention to detail. With a combined experience of over 60 years in the performance tuning market, we really do live and breathe this industry. This wealth of knowledge has been focused into designing and manufacturing cutting edge, top quality and innovative products.

How many clicks do you need to adjust rebound on a coilover?

Other enthusiast-geared applications offer user-adjustment of these settings, and in varying levels. For starters is Rebound adjustment, which often comes with 16 clicks of adjustment for users to fine-tune how their coilovers react following compression.

How do you adjust coilovers on a Raceland?

With partially threaded coilovers like the one shown, to raise the car, you will turn the collars up the shock body and to lower you will turn the collars down the shock body. To adjust the coilovers, first, unlock collar B by taking your adjustment wrench and turn it clock-wise. Once loose, spin collar B by hand down the length of the coilover.

How do you adjust stance on coilovers? To adjust the coilovers, first, unlock collar B by taking your adjustment wrench and turn it clock-wise. Once loose, spin collar B by hand down the length of the coilover. You will then use the adjustment wrench to turn collar A clockwise to lower and counter-clockwise to raise…