How do you set a dixell thermostat?

1. Push the SET key for more than 2 seconds to change the Set point value; 2. The value of the set point will be displayed and the “°C” or “°F” LED starts blinking; 3. To change the Set value push the or arrows.

How do you change the temperature on a dixell?

Temperature Setting

Press and hold in the set button for 5 seconds to see the temperature setting.
To adjust the temperature setting use the up or down arrow.
**normal setting is 4 degree F.
After checking or changing the temperature setting – press the set button.

How do you reset a dixell freezer?

Resetting the Temperatures

With either the maximum or minimum temperature displayed, press and hold the SET button for more than three seconds. The “rSt” message will display on the screen.
The controller confirms the reset by having the “rSt” blink. After this, the normal temperature will display on the screen.

How do you reset a polar fridge?

You can do a soft reset by pressing and holding the UP, DOWN, BACK and LIGHT buttons simultaneously for five seconds until the Polar animation is shown on the display.

How do I set the temperature on my eliwell controller?

Setting the Set-point: To display the Set point value press the key when the ‘SEt’ label is displayed. The Set point value appears on the display. To change the Set point value, press the and keys within 15 seconds. Press to confirm the modification.

How do you adjust the temperature on a Foster refrigerator?

Check/adjust the temperature set point. Check set point by pressing the button To increase set point press + until required temperature is displayed. To decrease set point press + until required temperature is displayed.

What should your freezer temp be?

0° F
Keep your appliances at the proper temperatures. Keep the refrigerator temperature at or below 40° F (4° C). The freezer temperature should be 0° F (-18° C). Check temperatures periodically. Appliance thermometers are the best way of knowing these temperatures and are generally inexpensive.

https://www.youtube.com/watch?v=WoHtgP0QAKA

How do you set a dixell thermostat? 1. Push the SET key for more than 2 seconds to change the Set point value; 2. The value of the set point will be displayed and the “°C” or “°F” LED starts blinking; 3. To change the Set value push the or arrows. How do you change…