How do you take the seat off a Street Glide?

First thing to do is pull firmly upward on the seat strap so it gives you a little space. After it’s loosened up, remove the screw at the rear of the seat. Press downward on the middle of the seat with one hand and pull back with the other. This will pull it off of the tab on the frame.

How do you take the seat off a 2006 Heritage Softail?

Seat Removal

Remove the passenger seat strap by removing the Torx head screw from the strap’s bracket on either side of the seat.
Remove the Torx head bolt from the rear of the passenger seat.
Pull the seat free from the motorcycle, and be careful not to lose the nylon washer sandwiched between the seat tab and fender.

How do you remove a Dyna Wide Glide seat?

How to Remove the Seat From a Dyna Wide Glide

Unscrew the seat bolt from between the sissy bar’s legs, positioned on a bracket above the rear fender, using a Phillips screwdriver.
Lift the rear of the seat upward slightly to provide clearance above the rear fender.

How do I disconnect my Harley battery without alarm?

Re: How to remove the battery without alarm going off? Have the Fob near the bike and turn on the ignition then turn it off. This should reset the alarm.

How do you change the battery in a Heritage Softail?

Change the Battery

Unbolt the negative battery cable with a 10-mm open-ended wrench. Do the same with the positive terminal.
Disconnect the rubber battery strap. Lift the battery out of its tray. Install a new battery in reverse order. “Softail Service Manual”; Harley-Davidson; 1997.

What does FLH Harley stand for?

FLH= electra glides rubber mount motors( ultra,classic,standard,streetglide,roadkigs.roadgl ides) FXSTS= FX softail standard.

How to remove your seat on a Harley Davidson?

How to REMOVE your Harley Davidson seat. – YouTube How to REMOVE your Harley Davidson seat. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

How do you remove a battery from a Harley Davidson?

At this point, you can access the battery ground cable; disconnect it, wrap it with electrical tape, and move on. Or, you can continue to remove the battery completely. Do this by simply removing the plastic ECM mounting plate/bracket.

What should I do to fix my Harley Davidson?

In this video, Bob goes through Harley seat and Harley battery removal on the 103, Twin Cooled, High Output, Rushmore bike. You should begin every service or repair with Harley Battery removal and Harley seat removal. The most important part would be disconnecting the battery’s negative cable.

How do you take the seat off a Street Glide? First thing to do is pull firmly upward on the seat strap so it gives you a little space. After it’s loosened up, remove the screw at the rear of the seat. Press downward on the middle of the seat with one hand and pull…