How do you use speedball emulsion remover?

Speedball’s Photo Emulsion Remover easily removes Diazo Photo Emulsion & Sensitizer from screens used in screen printing. Simply apply the remover to both sides of the screen and scrub with a soft brush. Apply again, wait 3 minutes, then scrub and rinse with hot water. The screen is now ready for use.

How long do you expose speedball emulsion?

Exposure Time 45 mins.

What temperature should you set speedball ink?

Speedball water-based fabric inks can be cured by using a household iron. Check your iron settings compared to the fabric you printed on. Use only fabrics that can be subjected to temperatures of at least 275°-375° F.

Do you need sensitizer for photo emulsion?

Diazo Photo Emulsion Mixing Speedball’s Diazo Photo Emulsion is a 2-step process where the photo emulsion needs to be “activated.” To activate the emulsion, sensitizer must be added.

How long do you heat press speedball ink?

Speedball recommends 24-48 hours. I am usually trying to get shirts done the night before I need them. Personally, I haven’t had any problems with heat setting them after less than 24 hours of drying. If you are selling your shirts, I would suggest waiting at least the 24 hours before moving on to the next step.

How long does it take for Speedball fabric ink to dry?

Colors will dry to the touch overnight. Allow 7 days for ink to fully cure before washing and drying.

What is the best way to clean emulsion?

You need only a very weak detergent solution for cleaning emulsion surfaces – 60 millilitres (ml) (4 tablespoons) of soap in about 5 litres (a gallon) of hot water. Any multi-purpose liquid cleaner is fine.

Which is the best Speedball photo emulsion kit?

Speedball’s Diazo Photo Emulsion & Sensitizer offer professional-grade results and remove the need for expensive equipment and darkrooms.

Can you use Speedball diazo for screen printing?

Compatible with Most Screen Printing Inks – For use with polyester screen fabrics, Speedball’s Diazo Photo Emulsion & Sensitizer may be used with any water-based or solvent-based ink and can be easily removed with Speedball’s Photo Emulsion Remover.

What’s the advantage of using Speedball diazo emulsion?

The big advantage of Speedball’s’ Diazo Photo Emulsion is there is no need for a light safe environment. Simply working under normal light will keep the emulsion from premature exposure. Fill the sensitizer bottle approximately ½ full with water (tap or distilled water works just fine.)

What kind of ink do you use with Speedball?

This makes the ink perfect for home and studio use. I exclusively use Speedball’s Acrylic Screen Printing Ink for all my printing. The saturation of the colors is second to none – they mix very well so that I can create very specific hues as well as regulate the opacity and transparency of the inks.

How do you use speedball emulsion remover? Speedball’s Photo Emulsion Remover easily removes Diazo Photo Emulsion & Sensitizer from screens used in screen printing. Simply apply the remover to both sides of the screen and scrub with a soft brush. Apply again, wait 3 minutes, then scrub and rinse with hot water. The screen is…