How to do a Vauxhall Corsa Z20LET conversion?

Before starting you will need to extend your battery looms as the z20let ones have no way of reaching your battery as they are! Get your offside mount and bolt it into the car. This is the only mount we are bolting at this stage. Get your rear gearbox fork and bolt this to replace your orignal one, we are using the diesel one as it is alot shorter.

Do you need an ECU for a Z20LET?

If you have a 1.4 or 1.8 you WILL need the z20let ecu, transponer, wiring, key, chip and the wiring stage is a little more effort but can be done. Those are the mounts you need. The only problem with running these mounts is that the drivers side is a very tight squeez and sits a little bent.

Do you need a transponer for a Z20LET?

Along with the engine you will need the engine wiring loom. If you have a 1.4 or 1.8 you WILL need the z20let ecu, transponer, wiring, key, chip and the wiring stage is a little more effort but can be done. Those are the mounts you need.

Can a Z20LET be moved after the engine is out?

Make sure the car is secure on axle stands as one nock on the frame could = disaster! If you plan to move the car after the engine is out make sure you have driveshafts in as if your hub bearings are worn they could split and that means your wheels will freely fall off!

What can I do with a Corsa exhaust system?

In addition to exhaust kits and cold air intake kits, we also sell exhaust parts like performance headers and a range of other exhaust accessories, including tip kits, X-Pipes, resonator deletes and performance mufflers. Transform your vehicle with a CORSA PERFORMANCE cold air intake and exhaust system.

How do you change the gearbox on a Vauxhall Corsa-C?

Get your offside mount and bolt it into the car. This is the only mount we are bolting at this stage. Get your rear gearbox fork and bolt this to replace your orignal one, we are using the diesel one as it is alot shorter. Now, you need to bolt the rear gearbox mount to the gearbox.

Do you have to buy new bearings for Vauxhall Corsa?

You will need to buy a new set of bearings as your old ones will get nakered pressing them out. With your new bearings to hand get your original corsa hubs pressed out of your nuckle and get your new bearing pressed in along with the new hubs.

How to do a Vauxhall Corsa Z20LET conversion? Before starting you will need to extend your battery looms as the z20let ones have no way of reaching your battery as they are! Get your offside mount and bolt it into the car. This is the only mount we are bolting at this stage. Get your…