What are the applications of cast iron?

Applications of cast iron

It is used in making pipes, to carry suitable fluids.
It is used in making different machines.
It is used in making automotive parts.
It is used in making pots pans and utensils.
It is used in making anchor for ships.

What are the properties of nodular cast iron?

Nodular Cast Iron (hereafter called “NCI”) is an engineering material displaying high ductility, elastic modulus, mechanical strength and corrosion resistance; in addition, it has low cost and is easy to produce and machine1, and is thus widely used as a structural material.

Is nodular iron the same as cast iron?

Nodular iron is also called ductile iron. Because the spheroids interrupt the matrix much less than graphite flakes, nodular cast iron has higher strength and toughness than gray cast iron. The formation of nodules or spheroids occurs when eutectic graphite separates from the molten iron during solidification.

What is the composition of nodular cast iron?

The range of the chemical composition for the nodular cast iron with carbides and a mixture of upper and lower bainite was as follows (wt %): C=3.57–3.83 %, Si = 2.36–2.87 %, Mn 0.05–0.09 %, Cr=0.00–0.34 %, Mo = 1.91–2.05 %, and Ni=1.33–1.62 %.

What is the disadvantage of cast iron?

Disadvantages of cast iron cookware Cast iron is heavier than other cookware. Bare cast iron is not the best for boiling water and cooking acidic foods. Cast iron cookware will need re-seasoning. Cast iron pans take longer to heat up.

What is the benefit of using cast iron cookware?

Once cast iron is hot, it stays hot. So cast iron pans are great for searing meat. Cast iron is great for keeping food warm since it holds heat for a considerable length of time.

What are the four types of cast iron?

There are four basic types of cast iron – white iron, gray iron, ductile iron and malleable iron

white iron.
gray iron.
ductile iron.
malleable iron.

What are the advantages of nodular cast iron over gray cast iron?

Nodular iron has higher strengths, greater elongation and better resistance to impact than grey iron. The nodular iron family offers the design engineer a unique combination of strength, wear and fatigue resistance and toughness as well as excellent ductility characteristics.

What are the advantages of nodular cast iron over GREY cast iron?

What are the three types of cast iron?

The 4 Types of Cast Iron

#1) Gray Cast Iron. The most common type, gray cast iron features a graphite microstructure consisting of many small fractures.
#2) White Cast Iron. While not as common as gray cast iron, white cast iron is another type worth mentioning.
#3) Ductile Cast Iron.
#4) Malleable Cast Iron.

Which of the following is another name of nodular cast iron?

Ductile iron, also known as ductile cast iron, nodular cast iron, spheroidal graphite iron, spheroidal graphite cast iron and SG iron, is a type of graphite-rich cast iron discovered in 1943 by Keith Millis.

What should you not cook in cast iron?

4 Things You Should Never Cook in Cast Iron:

Smelly foods. Garlic, peppers, some fish, stinky cheeses and more tend to leave aromatic memories with your pan that will turn up in the next couple of things you cook in it.
Eggs and other sticky things (for a while)
Delicate fish.
Acidic things—maybe.

What are the properties of ductile iron?

Ductile iron properties. Ductile iron owes its remarkable mechanical properties to the spheroidal shape of its graphite: tensile strength, impact resistance, high elastic limit, good elongation.

Is cast iron ductile?

What is ductile pipe fitting?

Pipe Fittings. FT Ductile provides a wide range of pipe fittings in a variety of different measurements. Applied to joining two consecutive pipes together, using the correct pipe fittings is vital to ensure the efficiency of both the pipes themselves, and also the entire system of pipes in place.

What are the applications of cast iron? Applications of cast iron It is used in making pipes, to carry suitable fluids. It is used in making different machines. It is used in making automotive parts. It is used in making pots pans and utensils. It is used in making anchor for ships. What are the…