When must a fully specified static route be used?

It is recommended that when the exit interface is an Ethernet network, that a fully specified static route is used including both the exit interface and the next-hop address. As shown in Figure 2, when forwarding packets to R2, the exit interface is GigabitEthernet 0/1 and the next-hop IPv4 address is 172.16. 2.2.

What must be specified when configuring static route?

Static routes have five parameters: destination IP address, mask, outbound interface, next hop, and priority.

How do you configure a static route?

Configure a Static Route

Select. Network. Virtual Router.
Select the. Static Routes. tab.
Select. IPv4. or.
Add. a. Name.
For. Destination. , enter the route and netmask (for example, 192.168.
Optional. ) For. Interface.
For. Next Hop. , select one of the following:
Enter an. Admin Distance.

What is standard static route?

A default static route is a route that matches all packets. A default route identifies the gateway IP address to which the router sends all IP packets that it does not have a learned or static route for. A default static route is simply a static route with 0.0. 0.0/0 as the destination IPv4 address.

What makes a fully specified static route different from other static routes?

In a fully specified static route: Both the output interface and the next-hop IP address are specified. This is another type of static route that is used in older IOSs, prior to CEF. interface is a multi-access interface and it is necessary to explicitly identify the next hop.

What are the types of static route?

The following types of IPv4 and IPv6 static routes will be discussed:

Standard static route.
Default static route.
Summary static route.
Floating static route.

How do I create a static route?

To set up a static route: Launch a web browser from a computer or mobile device that is connected to your router’s network. Enter http://www.routerlogin.net. Enter the router user name and password. Select ADVANCED > Advanced Setup > Static Routes. Click the Add button.

What is static route?

Static routing. Static routing is a form of routing that occurs when a router uses a manually-configured routing entry, rather than information from a dynamic routing traffic.

What are static routes?

What is a Static Route. A static route is a route that is created manually by a network administrator. Static routes are typically used in smaller networks.

What is a static IP route?

A static IP route specifies the route’s destination address and the next-hop router’s IP address or routing switch interface through which the routing switch can reach the destination. (The route is added to the routing switch’s IP route table.)

When must a fully specified static route be used? It is recommended that when the exit interface is an Ethernet network, that a fully specified static route is used including both the exit interface and the next-hop address. As shown in Figure 2, when forwarding packets to R2, the exit interface is GigabitEthernet 0/1 and…