Why is my check engine light on my Toyota Corolla?

Toyota Corolla Check Engine Light Flashing Other common reasons for a Check Engine Light are dirty mass airflow sensor, faulty emissions control part, a malfunction with the fuel injection system, damaged oxygen sensor, faulty head gasket, or defective spark plugs to name a few.

How do I check my engine code without a scanner?

Depress the odometer “Trip” and “Reset” buttons while simultaneously turning the ignition key “On” and “Off.” End with the key in the “On” position. Release the odometer buttons and read the trouble codes from the digital odometer.

How do you check the trouble code on a Toyota Corolla?

Checking to see what trouble code is lighting up the check engine light (malfunction indicator light -MIL) is done by jumpering together the TE1 and E1 terminals of the Data Link Connector (DLC) with a jumper wire (with the Key On Engine Off).

How do you read the OBD code on a Toyota?

Use a copper wire or paper clip to short terminals TE1 and E1. Go back inside the car and count the number of flashes for the check engine light. This procedure will not work on Toyota vehicles equipped with OBD-II. For most 2000 and newer vehicles, you will need a code reader to read check engine fault codes.

Where is the malfunction indicator light on a Toyota Corolla?

As mentioned at the beginning, your OBD I Toyota Corolla flashes the malfunction indicator light (MIL -also known as the check engine light CEL) once you have jumpered terminals TE1 and E1 in the diagnostic link connector (DLC). The DLC is located on the left strut tower in the engine compartment.

Where to find check engine light code on Toyota?

When retrieving Toyota check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on.

Why is my check engine light on my Toyota Corolla? Toyota Corolla Check Engine Light Flashing Other common reasons for a Check Engine Light are dirty mass airflow sensor, faulty emissions control part, a malfunction with the fuel injection system, damaged oxygen sensor, faulty head gasket, or defective spark plugs to name a few. How…